Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH › from 2015.08
RM19Y0E _59 Vehicle Exterior _003019 WIPER / WASHER _0015276 WIPER SWITCH G

WIPER / WASHER  WIPER SWITCH  INSPECTION  


PROCEDURE

Hide 84650 1.INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for RHD)

a.
E333876C02
1.438,1.052 0.927,0.5 true 1.333,1.125 0.896,1.823 true 1.594,1.135 1.479,1.833 true 1.74,1.042 1.49,0.51 true 2.021,1.125 2.167,1.823 true 1.885,1.063 2.083,0.5 true 2.156,1.135 2.802,1.823 true 2.26,1.063 2.708,0.51 true 0.729,1.854 1.219,2.021 0.49,0.167 10 false W_E 1.313,1.854 1.896,2.021 0.583,0.167 10 false F_INT 1.99,1.854 2.573,2.021 0.583,0.167 10 false R_INT 1.354,0.302 1.938,0.469 0.583,0.167 10 false F_HI 0.771,0.302 1.354,0.469 0.583,0.167 10 false R_W 2.656,1.854 3.24,2.021 0.583,0.167 10 false F_LO 1.979,0.302 2.563,0.469 0.583,0.167 10 false F_W 2.583,0.302 3.167,0.469 0.583,0.167 10 false R_ON 0.104,0.073 0.688,0.24 0.583,0.167 10 false *a
*a Component without harness connected
(Windshield Wiper Switch Assembly)


Check the resistance.

i.

Measure the resistance and check the results in accordance with the value(s) in the tables below.

Standard Resistance (Front Wiper Switch):
Tester Connections Conditions Specified Conditions
6 (F_INT) - 4 (W_E) MIST 10 kΩ or higher
10 (F_LO) - 4 (W_E) Below 1Ω
7 (F_HI) - 4 (W_E) 10 kΩ or higher
6 (F_INT) - 4 (W_E) OFF 10 kΩ or higher
10 (F_LO) - 4 (W_E) 10 kΩ or higher
7 (F_HI) - 4 (W_E) 10 kΩ or higher
6 (F_INT) - 4 (W_E) INT Below 1Ω
10 (F_LO) - 4 (W_E) 10 kΩ or higher
7 (F_HI) - 4 (W_E) 10 kΩ or higher
6 (F_INT) - 4 (W_E) LO 10 kΩ or higher
10 (F_LO) - 4 (W_E) Below 1Ω
7 (F_HI) - 4 (W_E) 10 kΩ or higher
6 (F_INT) - 4 (W_E) HI 10 kΩ or higher
10 (F_LO) - 4 (W_E) Below 1Ω
7 (F_HI) - 4 (W_E) Below 1Ω


If the result is not as specified, replace the windshield wiper switch assembly.

Standard Resistance (Washer Switch):
Tester Connections Conditions Specified Conditions
8 (F_W) - 4 (W_E) OFF 10 kΩ or higher
5 (R_W) - 4 (W_E) 10 kΩ or higher
8 (F_W) - 4 (W_E) FR ON Below 1Ω
5 (R_W) - 4 (W_E) 10 kΩ or higher
8 (F_W) - 4 (W_E) RR ON 10 kΩ or higher
5 (R_W) - 4 (W_E) Below 1Ω


If the result is not as specified, replace the windshield wiper switch assembly.

Standard Resistance (Rear Wiper Switch):
Tester Connections Conditions Specified Conditions
9 (R_INT) - 4 (W_E) OFF 10 kΩ or higher
11 (R_ON) - 4 (W_E) 10 kΩ or higher
9 (R_INT) - 4 (W_E) INT Below 1Ω
11 (R_ON) - 4 (W_E) 10 kΩ or higher
9 (R_INT) - 4 (W_E) ON Below 1Ω
11 (R_ON) - 4 (W_E) Below 1Ω


If the result is not as specified, replace the windshield wiper switch assembly.



Hide 84650 2.INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for LHD)

a.
E333875C02
0.74,0.583 1.323,1.052 true 0.781,1.74 1.073,1.146 true 1.417,1.729 1.229,1.135 true 2.073,1.719 1.625,1.135 true 2.688,1.729 2.031,1.125 true 1.208,0.604 1.448,1.042 true 1.823,0.615 1.719,1.052 true 2.458,0.604 1.896,1.052 true 0.125,0.094 0.438,0.25 0.313,0.156 10 false *a 0.573,1.802 1.115,2 0.542,0.198 10 false R_ON 1.26,1.802 1.781,2 0.521,0.198 10 false F_LO 1.958,1.802 2.406,2 0.448,0.198 10 false F_HI 2.594,1.802 3.104,2 0.51,0.198 10 false W_E 0.479,0.365 1.021,0.573 0.542,0.208 10 false R_INT 1.052,0.365 1.5,0.563 0.448,0.198 10 false F_W 1.646,0.365 2.177,0.563 0.531,0.198 10 false F_INT 2.344,0.365 2.969,0.563 0.625,0.198 10 false R_W
*a Component without harness connected
(Windshield Wiper Switch Assembly)


Check the resistance.

i.

Measure the resistance and check the results in accordance with the value(s) in the tables below.

Standard Resistance (Front Wiper Switch):
Tester Connections Conditions Specified Conditions
6 (F_HI) - 9 (W_E) MIST 10 kΩ or higher
3 (F_LO) - 9 (W_E) Below 1Ω
7 (F_INT) - 9 (W_E) 10 kΩ or higher
6 (F_HI) - 9 (W_E) OFF 10 kΩ or higher
3 (F_LO) - 9 (W_E) 10 kΩ or higher
7 (F_INT) - 9 (W_E) 10 kΩ or higher
6 (F_HI) - 9 (W_E) INT 10 kΩ or higher
3 (F_LO) - 9 (W_E) 10 kΩ or higher
7 (F_INT) - 9 (W_E) Below 1Ω
6 (F_HI) - 9 (W_E) LO 10 kΩ or higher
3 (F_LO) - 9 (W_E) Below 1Ω
7 (F_INT) - 9 (W_E) 10 kΩ or higher
6 (F_HI) - 9 (W_E) HI Below 1Ω
3 (F_LO) - 9 (W_E) Below 1Ω
7 (F_INT) - 9 (W_E) 10 kΩ or higher


If the result is not as specified, replace the windshield wiper switch assembly.

Standard Resistance (Washer Switch):
Tester Connections Conditions Specified Conditions
8 (R_W) - 9 (W_E) OFF 10 kΩ or higher
5 (F_W) - 9 (W_E) 10 kΩ or higher
8 (R_W) - 9 (W_E) FR ON 10 kΩ or higher
5 (F_W) - 9 (W_E) Below 1Ω
8 (R_W) - 9 (W_E) RR ON Below 1Ω
5 (F_W) - 9 (W_E) 10 kΩ or higher


If the result is not as specified, replace the windshield wiper switch assembly.

Standard Resistance (Rear Wiper Switch):
Tester Connections Conditions Specified Conditions
4 (R_INT) - 9 (W_E) OFF 10 kΩ or higher
2 (R_ON) - 9 (W_E) 10 kΩ or higher
4 (R_INT) - 9 (W_E) INT Below 1Ω
2 (R_ON) - 9 (W_E) 10 kΩ or higher
4 (R_INT) - 9 (W_E) ON Below 1Ω
2 (R_ON) - 9 (W_E) Below 1Ω


If the result is not as specified, replace the windshield wiper switch assembly.