Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ANTI-LOCK BRAKE SYSTEM › from 2015.08
RM19Y0E _54 Brake _002992 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0015137 ANTI-LOCK BRAKE SYSTEM D

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ANTI-LOCK BRAKE SYSTEM  SYSTEM DESCRIPTION  


FUNCTION DESCRIPTION


a.

ABS (Anti-lock Brake System)

The ABS helps prevent the wheels from locking when the brakes are applied firmly or when braking on a slippery surface.


b.

EBD (Electronic Brake force Distribution)

EBD control utilizes the ABS and performs proper brake force distribution between the front and rear wheels in accordance with driving conditions. In addition, when braking while cornering, it also controls the brake forces of the right and left wheels, helping to maintain vehicle behavior.



FUNCTION OF COMPONENTS


Component Function
Speed sensor Detects the speed of each wheel and inputs the data into the skid control ECU (brake actuator assembly).
Stop light switch assembly Detects the brake pedal condition and inputs the status to the skid control ECU (brake actuator assembly).
Skid control ECU
·

Processes the signals sent from each sensor to control the ABS and EBD.

·

Housed in the brake actuator assembly.


ABS motor relay
·

Supplies power to the ABS pump motor.

·

Housed in the skid control ECU.


ABS solenoid relay
·

Supplies power to each solenoid.

·

Housed in the skid control ECU.


Brake actuator assembly
·

Composed of the holding solenoid valves, pressure reduction solenoid valves, ABS pump motor, etc., and adjusts the hydraulic pressure applied to each wheel cylinder.

·

Houses the skid control ECU.


ABS warning light
·

Comes on to inform the driver that a malfunction in the ABS has occurred.

·

Blinks to output DTCs.


Brake warning light
·

Comes on to inform the driver that the amount of brake fluid is low.

·

Comes on to inform the driver that a malfunction in the EBD has occurred.