CHECK FREEZE FRAME DATA
Connect the GTS or Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the GTS or Techstream on.
Enter the following menus: Powertrain / A/T / Trouble Codes.
According to the display on the GTS or Techstream, select the trouble code data display with freeze frame data.
| Tester Display |
|---|
| Engine Speed |
| SPD(NT) |
| SPD(NO) |
| Vehicle Speed |
| Throttle POS |
| Throttle position |
| Battery Voltage |
| Stop Light Switch |
| A/T Oil Temperature 1 |
| SL1 Solenoid Status |
| SL2 Solenoid Status |
| SL3 Solenoid Status |
| Lock Up Solenoid Status |
| SOL4 current |
| SOL5 current |
| Shift SW Status(P) |
| Shift SW Status(R) |
| Shift SW Status(N) |
| Shift SW Status(D) |
| Shift SW Status(3) |
| Shift SW Status(2) |
| Shift SW Status(L) |
| Sports Shift Up SW |
| Sports Shift Down SW |
| Steer mode selection SW |
| Overdrive Cut Switch #2 |
| Shift Status |
| Lock Up |