Home › Power Source / Network › 2NR-VE BATTERY / CHARGING › BATTERY CURRENT SENSOR › from 2015.08
RM19Y0E _57 Power Source / Network _041459 2NR-VE BATTERY / CHARGING _0212102 BATTERY CURRENT SENSOR A

2NR-VE BATTERY / CHARGING  BATTERY CURRENT SENSOR  INSTALLATION  


PROCEDURE

Hide 28850 1.INSTALL BATTERY CURRENT SENSOR ASSEMBLY

a.
E234680

Pass through the battery current sensor assembly to the negative (-) battery terminal.


b.

Engage the clamp to install the battery current sensor assembly.


c.

Connect the connector.


Hide 2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
6.4 N*m (65 kgf*cm, 57 in.*lbf)