Home › General › SPECIFICATIONS › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › from 2016.09
RM19Y0E _V1 General _002965 SPECIFICATIONS _0014919 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS F

SPECIFICATIONS  BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  SERVICE DATA  


VSC OFF SWITCH(for LHD):
Tester Connection Switch Condition Specified Condition
Vehicle Stability Control Switch 6 (B) - 3 (L) Switch pushed Below 1 Ω
6 (B) - 3 (L) Switch not pushed 10 kΩ or higher
Battery positive (+) → Terminal 5 (ILL+)
Battery negative (-) → Terminal 4 (ILL-)
- Illuminates

VSC OFF SWITCH(for RHD):
Tester Connection Switch Condition Specified Condition
Vehicle Stability Control Switch 3 (B) - 4 (L) Switch pushed Below 1 Ω
3 (B) - 4 (L) Switch not pushed 10 kΩ or higher
Battery positive (+) → Terminal 1 (ILL+)
Battery negative (-) → Terminal 2 (ILL-)
- Illuminates