Home › Vehicle Exterior › BODY PANEL › NAME PLATE › 2016.10–2020.08
BM32K0E _01 Vehicle Exterior _060428 BODY WELD POINT _0299156 NAME PLATE F

BODY WELD POINT  NAME PLATE  ATTACHMENT POSITION  


1.

Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

HINT:

Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.


2.

Wipe off the remaining double-sided tape using a clean cloth or equivalent.

NOTICE:

If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.


3.

After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

HINT:

The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.



B458849C01
2.094,5.281 2.094,4.948 false 2.083,0.667 2.25,0.667 2.25,0.667 2.906,1.271 true 4.75,0.417 4.583,0.417 4.583,0.417 3.625,1.188 true 1.75,2.167 1.917,2.167 1.917,2.167 2.906,1.396 true 5.333,2 5.167,2 5.167,2 4.198,1.333 true 5.01,4.99 5.01,4.656 false 4.917,7.083 4.917,6.75 false 1.458,7.104 1.458,6.771 false 1.781,5.323 2.417,5.51 0.635,0.188 10 false <C> ● *1 4.698,5.031 5.333,5.24 0.635,0.208 10 false <D> ● *4 1.146,7.146 1.792,7.344 0.646,0.198 10 false <A> ● *2 4.604,7.115 5.281,7.313 0.677,0.198 10 false <B> ● *3 1.74,0.563 2.198,0.76 0.458,0.198 10 false <A> 1.417,2.063 1.875,2.26 0.458,0.198 10 false <B> 4.813,0.323 5.271,0.521 0.458,0.198 10 false <C> 5.396,1.896 5.854,2.094 0.458,0.198 10 false <D>
*1 NO. 1 BACK DOOR EMBLEM *2 NO. 1 BACK DOOR NAME PLATE
*3 NO. 2 BACK DOOR NAME PLATE *4 NO. 3 BACK DOOR NAME PLATE
● Non-reusable part - -


B458850C01
1.833,4.458 1.833,4.792 false 5.25,4.438 5.25,4.771 false 0.25,0.167 0.531,0.396 0.281,0.229 12 false *A 3.917,0.167 4.167,0.385 0.25,0.219 12 false *B 1.708,4.833 2.052,5.01 0.344,0.177 10 false ● *1 5.125,4.813 5.469,4.99 0.344,0.177 10 false ● *1
*A for LH Side *B for RH Side
*1 SIDE PANEL EMBLEM - -
● Non-reusable part - -


SIDE PANEL EMBLEM


a.

for LH Side:

B458891C01
0.156,0.063 0.469,0.26 0.313,0.198 10 false *a 0.542,1.021 0.708,1.219 0.167,0.198 10 true A 2.865,1.073 3.031,1.271 0.167,0.198 10 true B 2.323,1.698 2.49,1.896 0.167,0.198 10 true C 1.635,0.604 1.802,0.802 0.167,0.198 10 true D
*a Reference Values - -


Standard Measurement:
Area Measurement Area Measurement
A 85.5 mm (3.37 in.) B 42.8 mm (1.69 in.)
C 62.6 mm (2.46 in.) D 195.5 mm (7.70 in.)



b.

for RH Side:

B458892C01
4.479,0.073 4.792,0.271 0.313,0.198 10 false *a 4.188,1.052 4.5,1.25 0.313,0.198 10 false B 6.469,0.948 6.646,1.135 0.177,0.188 10 true A 4.76,1.708 4.938,1.896 0.177,0.188 10 true C 5.583,0.594 5.76,0.781 0.177,0.188 10 true D
*a Reference Values - -


Standard Measurement:
Area Measurement Area Measurement
A 90.6 mm (3.57 in.) B 45.9 mm (1.807 in.)
C 55.8 mm (2.20 in.) D 190.4 mm (7.50 in.)




NO. 1 BACK DOOR EMBLEM


B458672C01
0.448,3.854 0.677,3.469 true 2.896,3.885 2.677,3.469 true 0.344,3.875 0.656,4.073 0.313,0.198 10 false *a 2.865,3.938 3.177,4.135 0.313,0.198 10 false *a
*a Location Pin



NO. 1 BACK DOOR NAME PLATE


B458673C01
4.094,0.073 4.406,0.271 0.313,0.198 10 false *a 3.979,1.021 4.167,1.219 0.188,0.198 10 true A 6.198,0.938 6.385,1.135 0.188,0.198 10 true B 4.625,1.74 4.813,1.938 0.188,0.198 10 true C
*a Reference Values - -


Standard Measurement:
Area Measurement Area Measurement
A 57.0 mm (2.24 in.) B 85.5 mm (3.37 in.)
C 83.2 mm (3.28 in.) - -



NO. 2 BACK DOOR NAME PLATE


B458675C01
4.094,0.083 4.406,0.281 0.313,0.198 10 false *a 4.646,0.865 4.865,1.063 0.219,0.198 10 true A 6.031,0.865 6.25,1.063 0.219,0.198 10 true B
*a Reference Values - -


Standard Measurement:
Area Measurement Area Measurement
A 65.1 mm (2.56 in.) B 113.7 mm (4.48 in.)



NO. 3 BACK DOOR NAME PLATE


B458890C01
4.031,0.052 4.25,0.25 0.219,0.198 10 true *a 4.344,0.906 4.531,1.104 0.188,0.198 10 true A 5.188,1 5.375,1.198 0.188,0.198 10 true B 5.698,0.958 5.885,1.156 0.188,0.198 10 true C 5.26,1.688 5.448,1.885 0.188,0.198 10 true D
*a Reference Values - -


Standard Measurement:
Area Measurement Area Measurement
A 115.8 mm (4.56 in.) B 78.9 mm (3.106 in.)
C 74.3 mm (2.93 in.) D 191.4 mm (7.54 in.)