Home › Vehicle Exterior › PAINTING / COATING › BODY PANEL UNDERCOATING (for TMMT Made) › 2019.09–2020.08
BM32K0E _01 Vehicle Exterior _060776 PAINTING / COATING _0407937 BODY PANEL UNDERCOATING(for TMMT Made) F

PAINTING / COATING  BODY PANEL UNDERCOATING(for TMMT Made)  APPLICATION AREAS  


CAUTION:

Work must be performed while wearing the appropriate protective gear and in a well-ventilated area.


1.

Apply undercoating to the chassis, floor underside, sheet metal fitting weld points of the body, and inside of the wheel house to prevent rust and noise, as well as protect the body from gravel.

NOTICE:

Do not coat high temperature areas, such as the tailpipe, or moving parts, such as the drive shaft.


HINT:
·

Apply degreasing agent to a clean cloth and clean any dirt and oil from the application areas.

·

Cover the surrounding areas of the application areas with masking paper to avoid coating unnecessary areas.

·

Apply body sealer to the panel joints in advance.

·

Do not leave any gaps between the panel joints.

·

Referring to the notes above, undercoating should be applied according to the specifications for your country.




K154541C01
0.417,3.833 6.75,8.667 6.333,4.833 0.417,6.333 6.75,6.333 false 0.5,3.583 0.813,3.781 0.313,0.198 10 false *B 0.667,4.083 0.979,4.281 0.313,0.198 10 false *C 0.667,6.583 0.979,6.781 0.313,0.198 10 false *D 0.25,0.25 0.563,0.448 0.313,0.198 10 false *A
*A for Type A *B w/o Wheel House Liner
*C LH Side *D RH Side


K154542C01
0.417,3.833 6.75,8.667 6.333,4.833 0.417,6.333 6.75,6.333 false 0.5,3.583 0.813,3.781 0.313,0.198 10 false *B 0.667,4.083 0.979,4.281 0.313,0.198 10 false *C 0.667,6.583 0.979,6.781 0.313,0.198 10 false *D 0.25,0.25 0.563,0.448 0.313,0.198 10 false *A
*A for Type A *B w/ Wheel House Liner
*C LH Side *D RH Side


K154548C01
0.417,3.833 6.75,8.667 6.333,4.833 0.417,6.333 6.75,6.333 false 0.5,3.583 0.813,3.781 0.313,0.198 10 false *B 0.667,4.083 0.979,4.281 0.313,0.198 10 false *C 0.667,6.583 0.979,6.781 0.313,0.198 10 false *D 0.25,0.25 0.563,0.448 0.313,0.198 10 false *A
*A for Type B *B w/o Wheel House Liner
*C LH Side *D RH Side


K154547C01
0.417,3.833 6.75,8.667 6.333,4.833 0.417,6.333 6.75,6.333 false 0.5,3.583 0.813,3.781 0.313,0.198 10 false *B 0.667,4.083 0.979,4.281 0.313,0.198 10 false *C 0.667,6.583 0.979,6.781 0.313,0.198 10 false *D 0.25,0.25 0.563,0.448 0.313,0.198 10 false *A
*A for Type B *B w/ Wheel House Liner
*C LH Side *D RH Side


K154551C01
0.417,3.833 6.75,8.667 6.333,4.833 0.417,6.333 6.75,6.333 false 0.5,3.583 0.813,3.781 0.313,0.198 10 false *B 0.667,4.083 0.979,4.281 0.313,0.198 10 false *C 0.667,6.583 0.979,6.781 0.313,0.198 10 false *D 0.25,0.25 0.563,0.448 0.313,0.198 10 false *A
*A for Type C *B w/ Wheel House Liner
*C LH Side *D RH Side