Refer to the TOYOTA Repair Manual for each work procedure.
PROCEDURES NECESSARY WHEN AUXILIARY BATTERY TERMINAL IS DISCONNECTED/RECONNECTED
| Necessary Procedures | Effect/Inoperative Function when Necessary Procedures not Performed |
|---|---|
|
*1: When performing learning using the GTS. |
|
| Perform steering sensor zero point calibration | Lane departure alert system (w/ Steering Control) |
| Toyota parking assist-sensor system*1 | |
| Parking support brake system*1 | |
| Simple intelligent parking assist system*1 | |
| Pre-collision system | |
| Memorize steering angle neutral point | Panoramic view monitor system |
| Initialize back door lock | Power door lock control system |
After the power switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 120 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal (for Audio and Visual System).
After the power switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 120 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal (for Navigation System (for Radio and Display Type)).