Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM › 2016.10–2019.09
NM32K0E _51 Engine / Hybrid System _059761 HYBRID / BATTERY CONTROL _0292891 HYBRID CONTROL SYSTEM DE DETAILS F

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM  DETAILS  INVERTER  


CONSTRUCTION


a.

The inverter converts the boosted high-voltage direct current of the HV battery into 3-phase alternating current to drive MG1 and MG2.


b.

The activation of the power transistors is controlled by the Motor Generator ECU (MG ECU). In addition, the inverter transmits information that is needed for current control, such as the output amperage or voltage, to the hybrid vehicle control ECU via the MG ECU.


c.

The power transistors used in the inverter are Insulated Gate Bipolar Transistors (IGBTs).


d.

Each of the bridge circuits for MG1 and MG2 contains 6 IGBTs, mounted on the high voltage and high current module portion of an Intelligent Power Module (IPM). In addition, a signal processor/protective function processor has been integrated into the control portion of the IPM. The IPM is used to operate the power transistors based on signals from the MG ECU.

W134593E01
4.885,1.969 5.719,1.563 5.719,1.563 5.885,1.563 true 1.646,1.49 1.813,1.49 1.813,1.49 2.104,1.979 true 5.99,1.5 6.938,1.99 0.948,0.49 10 false Inverter Current Sensor 0.656,1.396 1.604,1.885 0.948,0.49 10 false Inverter Current Sensor 2.063,1.427 2.302,1.698 0.24,0.271 10 false U 4.729,1.438 4.969,1.708 0.24,0.271 10 false V 2.688,1.427 2.927,1.698 0.24,0.271 10 false W 5.031,1.427 5.271,1.698 0.24,0.271 10 false W 2.396,1.438 2.635,1.708 0.24,0.271 10 false V 4.417,1.427 4.656,1.698 0.24,0.271 10 false U 2.156,0.76 2.698,1.052 0.542,0.292 10 false MG1 4.531,0.771 5.073,1.063 0.542,0.292 10 false MG2 4.979,4.552 5.521,4.844 0.542,0.292 10 false IGBT 4.219,5.25 5.792,5.542 1.573,0.292 10 false IPM for MG2 1.844,5.229 3.083,5.521 1.24,0.292 10 false IPM for MG1 3.323,6.073 4.896,6.365 1.573,0.292 10 false Inverter