Home › Engine / Hybrid System › 2ZR-FXE (ENGINE CONTROL) › SFI SYSTEM
NM32K0E _51 Engine / Hybrid System _061016 2ZR-FXE ENGINE CONTROL _0299011 SFI SYSTEM CO CONTROL F

2ZR-FXE ENGINE CONTROL  SFI SYSTEM  CONTROL  VVT-i CONTROL  


FUNCTION


a.

The VVT-i system is designed to control the intake camshaft within a range of 62° (of crankshaft angle) to provide valve timing that is optimally suited to the engine operating condition. This improves torque in all engine speed ranges as well as increasing fuel economy, and reducing exhaust emissions.

W130668C01
1.115,0.979 1.354,0.979 1.354,0.979 1.927,1.521 true 1,2.542 1.24,2.542 1.24,2.542 1.813,3.083 true 4.24,2.708 3.969,2.708 3.969,2.708 3.74,1.771 true 3.417,1.198 3.802,0.781 3.802,0.781 4.021,0.781 true 0.927,0.885 1.135,1.104 0.208,0.219 10 false *1 0.802,2.448 1.01,2.667 0.208,0.219 10 false *2 5.406,3.969 5.615,4.188 0.208,0.219 10 false *3 5.854,3.958 6.063,4.177 0.208,0.219 10 false *4 4.271,2.604 4.479,2.823 0.208,0.219 10 false *5 5.344,1.917 5.552,2.135 0.208,0.219 10 false *6 4.052,0.688 4.229,0.885 0.177,0.198 10 false *7
*1 Camshaft Timing Oil Control Valve Assembly *2 Crank Position Sensor
*3 Throttle Position Sensor *4 Intake Mass Air Flow Meter Sub-assembly
*5 E.F.I. Engine Coolant Temperature Sensor *6 ECM
*7 Cam Position Sensor - -


W130669E01
2.729,0.969 2.958,0.969 2.958,0.969 3.323,1.427 true 1.917,3.5 2.188,3.5 2.188,3.5 2.458,2.958 true 0.906,0.26 2.677,0.479 1.771,0.219 10 false Intake Valve Opening Angle 0.906,0.5 2.844,0.708 1.938,0.208 10 false Exhaust Valve Opening Angle 3.479,0.594 3.813,0.781 0.333,0.188 10 false TDC 3.49,4.406 3.823,4.594 0.333,0.188 10 false BDC 2.594,1.333 2.969,1.563 0.375,0.229 10 false 40° 3.802,1.052 4.177,1.281 0.375,0.229 10 false 9° 4.094,1.135 4.469,1.365 0.375,0.229 10 false 22° 4.333,3.74 4.708,3.969 0.375,0.229 10 false 35° 2.563,3.677 2.938,3.906 0.375,0.229 10 false 40° 1.938,2.188 2.344,2.406 0.406,0.219 10 false 102° 1.281,0.854 2.74,1.115 1.458,0.26 10 false VVT-i Operation Range 0.458,3.385 1.917,3.646 1.458,0.26 10 false VVT-i Operation Range



SYSTEM CONTROL


a.

Based on engine speed, intake air volume, throttle position and engine coolant temperature, the ECM calculates optimal valve timing for all driving conditions. The ECM also controls the camshaft timing oil control valve assembly. In addition, the ECM uses signals from the cam position sensor and the crank position sensor to detect the actual valve timing, thus providing feedback control to achieve the target valve timing.

W111644E03
5.469,1.063 5.667,0.323 5.667,0.323 5.896,0.323 true 3.948,4.052 4.406,4.25 0.458,0.198 10 false ECM 0.427,0.604 1.865,0.854 1.438,0.25 10 false Crank Position Sensor 0.406,1.042 1.75,1.479 1.344,0.438 10 false Intake Mass Air Flow Meter Sub-assembly 0.354,1.781 1.896,2 1.542,0.219 10 false Throttle Body Assembly 0.375,2.156 1.906,2.417 1.531,0.26 10 false Throttle Position Sensor 0.448,2.656 1.792,3.125 1.344,0.469 10 false E.F.I. Engine Coolant Temperature Sensor 0.438,3.51 1.813,3.781 1.375,0.271 10 false Cam Position Sensor 0.427,4.333 1.823,4.573 1.396,0.24 10 false Vehicle Speed Signal 3.458,0.802 4.771,1.083 1.313,0.281 10 false Target Valve Timing 3.792,2.854 4.5,3.115 0.708,0.26 10 false Correction 3.5,3.385 4.771,3.646 1.271,0.26 10 false Actual Valve Timing 5.958,0.24 6.656,0.667 0.698,0.427 10 false Duty-cycle Control 5.906,0.958 6.969,1.521 1.063,0.563 10 false Camshaft Timing Oil Control Valve Assembly


b.

When the camshaft timing oil control valve assembly is operated as illustrated below by the advance signal from the ECM, the resultant oil pressure is applied to the timing advance side vane chamber to rotate the camshaft in the timing advance direction.

W130231C02
0.458,0.677 0.667,0.677 0.667,0.677 1.073,1.156 true 0.344,2.563 0.552,2.563 0.552,2.563 0.76,2.021 true 4.49,2.719 5.083,2.719 true 0.281,0.573 0.469,0.771 0.188,0.198 10 false *a 0.167,2.458 0.354,2.656 0.188,0.198 10 false *b 4.313,2.615 4.5,2.813 0.188,0.198 10 false *c 5.021,2.781 5.208,2.979 0.188,0.198 10 false *d 5.25,2.771 5.438,2.969 0.188,0.198 10 false *e 6.26,2.115 6.448,2.313 0.188,0.198 10 false *1
*1 ECM - -
*a Vane *b Rotation Direction
*c Oil Pressure *d In
*e Drain - -



c.

When the camshaft timing oil control valve is operated as illustrated below by the retard signal from the ECM, the resultant oil pressure is applied to the timing retard side vane chamber to rotate the camshaft in the timing retard direction.

W130232C02
0.865,1.26 0.604,0.531 0.604,0.531 0.906,0.531 true 0.51,2.635 0.677,2.635 0.677,2.635 0.927,2.219 true 4.344,2.688 4.802,2.688 true 6.188,2.115 6.385,2.302 0.198,0.188 10 false *1 0.938,0.427 1.135,0.646 0.198,0.219 10 false *a 0.333,2.531 0.542,2.729 0.208,0.198 10 false *b 4.177,2.583 4.354,2.781 0.177,0.198 10 false *c 4.74,2.781 4.917,2.979 0.177,0.198 10 false *d 4.958,2.771 5.156,2.969 0.198,0.198 10 false *e
*1 ECM - -
*a Vane *b Rotation Direction
*c Oil Pressure *d Drain
*e In - -



d.

After reaching the target timing, the valve timing is held by keeping the camshaft timing oil control valve assembly in the neutral position unless the driving conditions change. This maintains the valve timing at the desired target position and prevents the engine oil from running out when unnecessary.