Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM
NM32K0E _58 Vehicle Interior _061018 THEFT DETERRENT / KEYLESS ENTRY _0299025 ENTRY AND START SYSTEM GE GENERAL F

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The entry and start system has the following main functions, making it a very user-friendly system.

Function Outline
Start Function The start function is operated by simply pressing the power switch while carrying the electrical key transmitter. When the power switch is pressed, the certification ECU turns on/off the ACC relay, IG1 relay and IG2 relay to switch the power source pattern.
·

The power source changes depending on depression of the brake pedal the shift position.


Immobiliser The immobiliser system compares the ID code that is registered in the certification ECU (smart key ECU assembly) with the ID code of the transponder chip that is embedded in the electrical key transmitter sub-assembly.
Steering Wheel Lock The steering wheel lock function is operated to lock and unlock the steering wheel by using a lock/unlock mechanism in the steering column assembly.
Entry Function* Entry Unlock All doors are unlocked by grabbing the front outside door handle assembly.
Entry Lock Touching the lock sensor of the front door outside handle assembly or the lock switch of the back door opener switch assembly will cause all doors to lock.
Entry Back Door Open The back door open can be operated manually by simply pressing the back door opener switch.
Wireless Door Lock Control Function The wireless door lock control function is a convenient system for locking and unlocking all the doors and the back door at a distance. The basic operation is the same as that of the wireless door lock control system.

HINT:

*: Models with entry function