Home › Engine / Hybrid System › 2ZR-FXE (ENGINE MECHANICAL) › ENGINE UNIT
NM32K0E _51 Engine / Hybrid System _061022 2ZR-FXE ENGINE MECHANICAL _0299032 ENGINE UNIT DE DETAILS F

2ZR-FXE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE LASH ADJUSTER  


CONSTRUCTION


a.

A valve lash adjuster assembly is located at the fulcrum of each No. 1 valve rocker arm sub-assembly. A valve lash adjuster assembly consists primarily of a plunger, a plunger spring, a check ball, and a check ball spring.


b.

The valve lash adjuster assembly is actuated by the engine oil, plunger spring, and check ball spring. The oil pressure and the spring force that act on the plunger push the No. 1 valve rocker arm sub-assembly against the cam, adjusting the valve clearance. This reduces the engine noise that is created during the opening and closing of the valves.

W131113C01
5.125,0.427 5.292,0.427 5.292,0.427 5.656,0.917 true 6.104,2.281 6.542,1.802 6.542,1.802 6.708,1.802 true 4.813,0.656 4.979,0.656 4.979,0.656 5.635,1.583 true 4.635,1.427 4.802,1.427 4.802,1.427 5.469,1.844 true 5.646,2.865 6.115,3.281 6.115,3.281 6.281,3.281 true 2.385,2.604 2.865,2.198 2.865,2.198 3.031,2.198 true 2.667,1.615 2.896,1.427 2.896,1.427 3.063,1.427 true 2.49,2.708 2.844,3 2.844,3 3.01,3 true 1.531,3.063 1.698,3.063 1.698,3.063 2.198,2.594 true 1.635,2.188 1.802,2.188 1.802,2.188 2.302,2.479 true 1.521,1.49 1.688,1.49 1.688,1.49 2.052,1.979 true 1.427,0.896 1.594,0.896 1.594,0.896 1.958,1.385 true 1.323,1.396 1.635,1.552 0.313,0.156 10 false *2 1.448,2.094 1.76,2.25 0.313,0.156 10 false *3 1.354,2.958 1.667,3.115 0.313,0.156 10 false *4 3.104,1.333 3.417,1.49 0.313,0.156 10 false *5 3.073,2.104 3.385,2.26 0.313,0.156 10 false *6 3.063,2.906 3.375,3.063 0.313,0.156 10 false *7 4.615,0.563 4.927,0.719 0.313,0.156 10 false *8 4.938,0.333 5.25,0.49 0.313,0.156 10 false *9 4.365,1.333 4.833,1.49 0.469,0.156 10 false *10 6.74,1.698 6.979,1.896 0.24,0.198 10 false *11 6.292,3.188 6.76,3.344 0.469,0.156 10 false *12 0.5,0.417 0.813,0.573 0.313,0.156 10 false *a 6.802,0.99 7.115,1.146 0.313,0.156 10 false *b 1.24,0.792 1.552,0.948 0.313,0.156 10 false *1
*1 Body *2 Plunger
*3 Check Ball *4 Ball Retainer
*5 Oil Hole *6 Check Ball Spring
*7 Plunger Spring *8 No. 1 Valve Rocker Arm Sub-assembly
*9 No. 2 Camshaft (Exhaust) *10 Oil Passage
*11 Exhaust Valve *12 Cylinder Head Sub-assembly
*a Valve Lash Adjuster Assembly Cross Section *b Clearance


HINT:

Valve clearance adjustment is not necessary because hydraulic valve lash adjusters are used.