Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY) › from 2019.09
NM32K0E _51 Engine / Hybrid System _059761 HYBRID / BATTERY CONTROL _0407473 HYBRID BATTERY SYSTEM(for LITHIUM-ION BATTERY) DE DETAILS F

HYBRID / BATTERY CONTROL  HYBRID BATTERY SYSTEM(for LITHIUM-ION BATTERY)  DETAILS  HV BATTERY JUNCTION BLOCK  


CONSTRUCTION


a.

The HV battery junction block assembly consists of the System Main Relays (SMRs), precharge resistor and battery current sensor.


b.

The SMRs are relays that connect and disconnect the HV battery and power cable (frame wire) in accordance with the signal from the hybrid vehicle control ECU. 3 relays are provided; SMRB for the battery positive (+) side, SMRG for the battery negative (-) side, and SMRP for pre-charging.

W132089C01
2,0.917 2,0.5 2,0.5 2.25,0.5 true 2.417,1.167 2.417,0.75 2.417,0.75 2.667,0.75 true 3,1.667 3,1.25 3,1.25 3.25,1.25 true 0.833,1.917 0.833,1.5 0.833,1.5 1.083,1.5 true 1.583,2.167 1.583,1.583 1.583,1.583 2.333,1.583 true 0.635,0.323 0.948,0.479 0.313,0.156 10 false *1 2.302,0.458 2.615,0.615 0.313,0.156 10 false *2 2.698,0.688 3.01,0.844 0.313,0.156 10 false *3 1.521,2.198 1.833,2.354 0.313,0.156 10 false *4 0.76,1.906 1.073,2.063 0.313,0.156 10 false *a 3.302,1.188 3.615,1.344 0.313,0.156 10 false *b
*1 HV Battery Junction Block Assembly *2 SMRB
*3 SMRP *4 SMRG
*a Battery Current Sensor *b Precharge Resistor



c.

A battery current sensor, which is built into the HV battery junction block assembly, is used to detect the HV battery charging and discharging amperage.


d.

The hybrid vehicle control ECU optimally controls the hybrid system so that the SOC of the HV battery can always be within a specified range according to the amperage information that is received via the battery ECU assembly.