CONSTRUCTION
A resin intake manifold is used. This manifold has 4 small pieces integrated using vibration welding, achieving a lightweight design.
EGR delivery is integrated into the intake manifold and designed in a tournament arrangement. This allows EGR gas to be equally distributed to the cylinders while also achieving a reduced number of components and a lightweight design.
The blowby gas circuit has been integrated into the intake manifold to simplify the engine.
| *1 | Intake Manifold | *2 | Gasket |
| *3 | Throttle Body Assembly | - | - |
| *a | EGR Delivery | *b | EGR Gas Flow |
| *c | Blowby Gas Flow | - | - |