CONSTRUCTION
The exhaust pipes use 2 ball joints in order to achieve a simple construction and ensured reliability.
GPF is provided at the front of the front exhaust pipe assembly.
A 2-way exhaust control system is provided to reduce noise and vibration from the main muffler.
| *1 | Tail Exhaust Pipe Assembly
·
Main Muffler |
*2 | Front Exhaust Pipe Assembly
·
Sub Muffler |
| *3 | Front Exhaust Pipe Assembly
·
GPF |
- | - |
| *a | Ball Joint Image | *b | Ball Joint Portion |
OPERATION
2-Way Exhaust Control System
In order to maintain quietness, and allow for high exhaust efficiency and high engine power output, a 2-way exhaust system is used for the main muffler. A control valve is used inside the main muffler to open the exhaust gas passage using the exhaust gas pressure. The control valve closes at low engine speeds by means of a return spring.
| *1 | Control Valve | - | - |
| *a | Low Engine Speed | *b | Middle to High Engine Speed |
| *c | The illustrations shown are examples only. | - | - |
|
Exhaust Gas | - | - |