CONSTRUCTION
The boost converter boosts the nominal voltage of DC201.6V*1*3 / DC207.2V*2*3 / DC216V*1*4 that is output by the HV battery to a maximum voltage of DC600V*3 / DC650V*4. The boost converter consists of a boost Intelligent Power Module (IPM) with a pair of built-in Insulated Gate Bipolar Transistors (IGBTs) which perform switching control, and a reactor which acts as an inductor. By using these components, the converter boosts the voltage.
When MG1 or MG2 acts as a generator, the inverter converts the alternating current (maximum voltage of DC600V*3 / DC650V*4) into DC, and then the boost converter reduces the voltage to a nominal voltage of DC201.6V*1*3 / DC207.2V*2*3 / DC216V*1*4, thus the HV battery is charged.
*1: Models with Nickel Metal Hydride (Ni-MH) battery
*2: Models with lithium-ion battery
*3: Models with 2ZR-FXE Engine
*4: Models with M20A-FXS Engine