Home › Engine / Hybrid System › M20A-FXS (ENGINE CONTROL) › SFI SYSTEM › from 2019.09
NM32K0E _51 Engine / Hybrid System _084637 M20A-FXS ENGINE CONTROL _0407613 SFI SYSTEM CO CONTROL F

M20A-FXS ENGINE CONTROL  SFI SYSTEM  CONTROL  DIRECT INJECTION 4-STROKE GASOLINE ENGINE SUPERIOR VERSION SEQUENTIAL MULTIPORT FUEL INJECTION (D-4S SFI)  


FUNCTION


a.

A Direct injection 4-stroke gasoline engine Superior version Sequential multiport Fuel Injection (D-4S SFI) system which has both direct injection type and port injection type is used for the fuel injection system.


b.

The intake air mass is detected by the intake mass air flow meter sub-assembly to control the fuel injection volume.


c.

Based on signals from each sensor, the ECM controls the injection volume and timing of port fuel injector assembly and direct fuel injector assembly in accordance with the engine speed and engine load in order to optimize combustion conditions. Due to this, engine oil dilution reduction, low fuel consumption, and improved emissions as well as high engine output are achieved.


d.

In order to fully maximize the effectiveness of direct injection (cooling effect, jet stream use, air-fuel mixture form variance), a multi-fuel injection system in which the injectors are pulsed multiple times during each injection is used. A D-4S injection control system that maximizes the merits of the port injection and direct injection is used.

Fuel Injector System Activation Ranges
W136137E05
1.833,3.083 2.083,3.083 2.083,3.083 2.5,2.667 true 5.083,1.583 5.583,0.917 5.583,0.917 5.75,0.917 true 2.771,1.875 4.667,2.104 1.896,0.229 10 false Direct Injection + Port Injection 5.802,0.823 6.771,1.031 0.969,0.208 10 false Direct Injection 0.969,2.979 1.792,3.188 0.823,0.208 10 false Port Injection 0.51,1.906 1.573,2.135 1.063,0.229 10 false Engine Load (%) 3.042,3.198 4.313,3.448 1.271,0.25 10 false Engine Speed (rpm)

W140850E01
0.219,0.26 2.865,0.521 2.646,0.26 10 false Intake Mass Air Flow Meter Sub-assembly 0.302,0.615 2.208,0.823 1.906,0.208 10 false Intake Air Temperature Sensor 0.219,1.198 1.698,1.406 1.479,0.208 10 false Crank Position Sensor 0.219,1.76 2.354,1.958 2.135,0.198 10 false Camshaft Position Sensor (Intake) 0.208,2.313 2.521,2.51 2.313,0.198 10 false Camshaft Position Sensor (Exhaust) 0.229,2.885 2.76,3.104 2.531,0.219 10 false Air Fuel Ratio Sensor (Bank 1, Sensor 1) 0.24,3.427 3.146,3.635 2.906,0.208 10 false No. 2 Air Fuel Ratio Sensor (Bank 1, Sensor 2) 0.219,4 2.5,4.219 2.281,0.219 10 false Engine Coolant Temperature Sensor 0.229,4.583 1.76,4.771 1.531,0.188 10 false Throttle Position Sensor 0.24,5.167 3.177,5.406 2.938,0.24 10 false No. 2 Fuel Pressure Sensor (for Low Pressure) 0.219,5.708 2.792,5.938 2.573,0.229 10 false Fuel Pressure Sensor (for High Pressure) 0.24,6.323 2.917,6.552 2.677,0.229 10 false E.F.I. Vacuum Sensor Assembly 4.281,3.302 4.688,3.49 0.406,0.188 10 false ECM 5.667,0.271 6.74,0.896 1.073,0.625 10 false Port Fuel Injector Assembly 5.667,2.948 6.854,3.51 1.188,0.563 10 false Direct Fuel Injector Assembly 0.531,7.375 3.208,7.604 2.677,0.229 10 false : CAN Communication Line 5.552,5.625 6.958,6.073 1.406,0.448 10 false Hybrid Vehicle Control ECU


e.

Fuel Cut

i.

When the engine speed exceeds the specified value, fuel injection is stopped to prevent over-revving.

Engine Speed for Fuel-cut at High Revs
Engine speed (rpm) 6300 or more