Home › Engine / Hybrid System › M20A-FXS (ENGINE CONTROL) › SFI SYSTEM › from 2019.09
NM32K0E _51 Engine / Hybrid System _084637 M20A-FXS ENGINE CONTROL _0407613 SFI SYSTEM CO CONTROL F

M20A-FXS ENGINE CONTROL  SFI SYSTEM  CONTROL  FUEL PUMP CONTROL (FOR HIGH-PRESSURE PUMP)  


FUNCTION


a.

The ECM performs variable control to achieve the high pressure fuel pressure in accordance with the driving conditions. By minimizing the amount of fuel discharged via the spill control valve, the required pump drive torque and noise are reduced.


b.

The ECM performs feedback control to achieve the desired value based on fuel pressure signals from the fuel pressure sensor installed in the fuel delivery pipe (for direct injection).

W140853E01
0.188,0.25 2.844,0.458 2.656,0.208 10 false Intake Mass Air Flow Meter Sub-assembly 0.281,0.604 2.177,0.802 1.896,0.198 10 false Intake Air Temperature Sensor 0.177,1.25 1.615,1.458 1.438,0.208 10 false Crank Position Sensor 0.198,1.854 2.333,2.073 2.135,0.219 10 false Camshaft Position Sensor (Intake) 0.198,2.448 2.469,2.656 2.271,0.208 10 false Camshaft Position Sensor (Exhaust) 0.198,3.052 2.479,3.26 2.281,0.208 10 false Engine Coolant Temperature Sensor 0.167,3.656 1.708,3.854 1.542,0.198 10 false Throttle Position Sensor 0.208,4.26 2.781,4.469 2.573,0.208 10 false Fuel Pressure Sensor (for High Pressure) 4.021,2.292 4.396,2.479 0.375,0.188 10 false ECM 5.563,0.802 6.896,1.375 1.333,0.573 10 false Fuel Pump Assembly (for High Pressure) 5.74,1.51 6.896,1.823 1.156,0.313 10 false Spill Control Valve 0.563,5.417 3.135,5.625 2.573,0.208 10 false : CAN Communication Line 5.573,3 6.979,3.375 1.406,0.375 10 false Hybrid Vehicle Control ECU

Control Pressure for Each Driving Condition
Condition Control Pressure
Idling 4.0 MPa
Except Idling 2.4 to 20 MPa