Home › Engine / Hybrid System › M20A-FXS (EMISSION CONTROL) › EVAPORATIVE EMISSION CONTROL SYSTEM › from 2019.09
NM32K0E _51 Engine / Hybrid System _084638 M20A-FXS EMISSION CONTROL _0407614 EVAPORATIVE EMISSION CONTROL SYSTEM CO CONTROL F

M20A-FXS EMISSION CONTROL  EVAPORATIVE EMISSION CONTROL SYSTEM  CONTROL  EVAPORATIVE EMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the evaporative emission control system are as follows:

Component Function
ECM Controls the purge VSV in accordance with the signals from various sensors in order to achieve a purge volume that suits the driving conditions.
Canister Contains activated charcoal to absorb the fuel vapor that is created in the fuel tank assembly.
Purge VSV (No. 1 Vacuum Switching Valve Assembly) Opens in accordance with the signals from the ECM when the system is purging in order to send the fuel vapor that was absorbed by the canister into the intake manifold.



SYSTEM CONTROL


a.

Based on the signals from various sensors, the ECM opens and closes the purge VSV (No. 1 vacuum switching valve assembly). Thus, it controls the purge flow of evaporative emissions (HC) in the canister in accordance with the engine operating conditions