CONSTRUCTION
The camshaft sub-assemblies are made of cast iron alloy.
A timing rotor for the camshaft position sensor is provided on the intake camshaft sub-assembly and exhaust camshaft sub-assembly.
The cam that drives the fuel pump assembly (for high pressure) is positioned between the No. 4 cylinder and the end of the exhaust camshaft sub-assembly to achieve size reduction. Also, a pump cam with 4 peaks is used in the cam that drives the fuel pump assembly (for high pressure) and by synchronizing fuel pressure-feeding and fuel injection, the difference in fuel pressure between cylinders is reduced.
| *1 | Camshaft Timing Gear Assembly | *2 | Intake Camshaft Sub-assembly |
| *3 | Camshaft Timing Exhaust Gear Assembly | *4 | Exhaust Camshaft Sub-assembly |
| *a | Cam (for Powering the Fuel Pump) | *b | Timing Rotor |
| *c | Modified Portion of Cam Profile | - | - |