FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
|
*1: Models with 6-speaker sound system *2: Models with 9-speaker sound system *3: Models with Digital Audio Broadcast (DAB) tuner *4: Models with FM-sub antenna |
|
| Radio and Display Receiver Assembly | ·
Outputs the audio signal of the selected audio source to the speakers*1 or stereo component amplifier assembly*2. ·
Sends each sound source and hands-free system status to the combination meter. ·
Using the equipped 2.4GHz frequency band wireless LAN, communicates via Wi-Fi with a wireless LAN access point, a tethering capable mobile phone or Wi-Fi mobile router. |
| Speakers | Output the audio sounds. |
| Roof Antenna Assembly
·
AM ·
FM ·
Antenna Amplifier |
·
Receives AM/FM radio broadcasts via the roof antenna assembly. ·
Amplifies radio broadcasting signals from the radio antenna and sends them to the radio receiver assembly. |
| Window Glass Antenna Wire (Rear)*3
·
DAB |
Receives radio broadcasting signals (DAB). |
| Digital Audio Broadcasting Antenna Assembly*3 | Amplifies DAB signals from the DAB antenna and sends them to the radio and display receiver assembly. |
| Window Glass Antenna Wire (Rear)*4
·
FM-sub |
Receives radio broadcasting signals (FM-sub). |
| No. 2 Amplifier Antenna Assembly*4 | Amplifies radio broadcasting signals from the radio antenna and sends them to the radio and display receiver assembly. |
| Steering Pad Switch Assembly | Sends operation signals such as volume adjustment, mode selection and song selections to the radio and display receiver assembly. |
| Telephone Microphone Assembly | ·
Detects voice during hands-free conversations and voice commands. ·
Is installed in the map light assembly and converts sound waves to an electrical signal and sends it to the radio and display receiver assembly. |
| No. 1 Stereo Jack Adapter Assembly | ·
When a USB memory device, portable audio player (USB type) or Apple device is connected, communicates with the radio and display receiver assembly via USB. |
| Combination Meter Assembly | ·
Displays various information and operation signals on the multi-information display sent from the radio and display receiver assembly via local bus communication. ·
Sends the vehicle speed signal to the radio and display receiver assembly. |
| Skid Control ECU (Brake Actuator Assembly) | Sends the parking brake position signal to the radio and display receiver assembly. |
| Hybrid Vehicle Control ECU | Sends the R shift position signal to the radio and display receiver assembly. |
| Stereo Component Amplifier Assembly*2 | Amplifies audio signals sent from the radio and display receiver assembly and sends them to the speakers. |
DIAGNOSIS
For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.