FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
|
*1: Models with 6-speaker sound system *2: Models with 9-speaker sound system *3: Models with Digital Audio Broadcast (DAB) tuner *4: Models with FM-sub antenna |
||
| Radio and Display Receiver Assembly | ·
Outputs the audio signal of the selected audio source to the speakers*1 or stereo component amplifier assembly*2. ·
Sends each sound source and hands-free system status to the combination meter. ·
Using the equipped 2.4GHz frequency band wireless LAN, communicates via Wi-Fi with a wireless LAN access point, a tethering capable mobile phone or Wi-Fi mobile router. ·
Receives navigation information, etc. image and audio signals and operation status via direct line from the navigation ECU or USB communication. ·
Based on the image signal sent from the navigation ECU, displays the map screen, operation screen, etc. ·
Sends the operation signals input via the capacitive touch display panel to the navigation ECU. |
|
| Navigation ECU | ·
Contains the navigation ECU, gyro sensor, GPS signal receiver and storage device, manages the radio and operation signals received from the radio and display receiver assembly, and controls the navigation system. ·
Sends navigation information, etc. image and sound signals and the operation status to the radio and display receiver assembly. |
|
| Major Components of Navigation ECU | Navigation Computer | ·
Corrects the vehicle location based on location information calculated from the GPS information, vehicle speed signal, information from equipped sensors and the shift status. ·
Using the calculated vehicle location mark and map database, sends the information and operation status to the radio and display receiver assembly. ·
Sends the audio signals such as voice guidance provided based on the vehicle location to the radio and display receiver assembly. ·
Sends the voice guidance audio signal to the radio and display receiver assembly. ·
Sends navigation information such as the vehicle direction and route guidance, etc. to the combination meter assembly via the radio and display receiver assembly. |
| Gyro Sensor | Detects the vehicle rotational speed around the vertical axis (yaw moments) and sends it to the navigation ECU. | |
| GPS Receiver | Demodulates the GPS information received by the roof antenna assembly, calculates the vehicle position and sends the position signal to the navigation ECU. | |
| Storage Device | Stores map data and the navigation system control program. | |
| Speakers | Output the audio sounds. | |
| Roof Antenna Assembly
·
AM ·
FM ·
Antenna Amplifier ·
GPS Antenna |
·
Receives AM/FM radio broadcasts via the roof antenna assembly. ·
Amplifies radio broadcasting signals from the radio antenna and sends them to the radio receiver assembly. ·
Receives signals from GPS satellites and transmits these signals to the navigation ECU. |
|
| Window Glass Antenna Wire (Rear)*3
·
DAB |
Receives radio broadcasting signals (DAB). | |
| Digital Audio Broadcasting Antenna Assembly*3 | Amplifies DAB signals from the DAB antenna and sends them to the radio and display receiver assembly. | |
| Window Glass Antenna Wire (Rear)*4
·
FM-sub |
Receives radio broadcasting signals (FM-sub). | |
| No. 2 Amplifier Antenna Assembly*4 | Amplifies radio broadcasting signals from the radio antenna and sends them to the radio and display receiver assembly. | |
| Steering Pad Switch Assembly | Sends operation signals such as volume adjustment, mode selection and song selections to the radio and display receiver assembly. | |
| Telephone Microphone Assembly | ·
Detects voice during hands-free conversations and voice commands. ·
Is installed in the map light assembly and converts sound waves to an electrical signal and sends it to the radio and display receiver assembly. |
|
| No. 1 Stereo Jack Adapter Assembly | ·
When a USB memory device, portable audio player (USB type) or Apple device is connected, communicates with the radio and display receiver assembly via USB. |
|
| Combination Meter Assembly | ·
Displays various information and operation signals on the multi-information display sent from the radio and display receiver assembly via local bus communication. ·
Sends the vehicle speed signal to the radio and display receiver assembly and navigation ECU. |
|
| Skid Control ECU (Brake Actuator Assembly) | Sends the parking brake position signal to the radio and display receiver assembly. | |
| Hybrid Vehicle Control ECU | Sends the R shift position signal to the radio and display receiver assembly. | |
| Stereo Component Amplifier Assembly*2 | Amplifies audio signals sent from the radio and display receiver assembly and sends them to the speakers. | |
FUNCTION
When guidance is being performed, traffic information and route information such as distance to the destination, traveling time, etc. are displayed on the map screen route guidance bar.
When the amount of fuel is low, a warning message is displayed and nearby gas stations are displayed on the multi-display. The user can set a nearby gas station as a destination by selecting from a list of nearby gas stations.
When route guidance is being performed and an alternative route is driven, the alternative route is memorized. When an alternative route other than the suggested route was chosen, the navigation system learns the route after it has been driven multiple times and displays it as a suitable route search result.
Memory points export/import function
The navigation system supports functions to export/import memory points. This function allows memory points stored in the radio and display receiver assembly to be transferred to another navigation system (such as another radio and display receiver assembly, etc.) via USB.
Memory points export/import procedure
DIAGNOSIS
For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.