Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2019.09–2020.08
NM32K0E _58 Vehicle Interior _060969 METER / GAUGE / DISPLAY _0298849 METER / GAUGE SYSTEM DE DETAILS F

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  DETAILS  COMBINATION METER  


FUNCTION


a.

Buzzer

i.

The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

*1: Models with simple intelligent parking assist system

*2: Models with Toyota safety sense

*3: Models with speed limiter control system

*4: Models with road sign assist system

Priority Item
1 READY
2 Simple Intelligent Parking Assist Indication Pattern 1 (Once)*1
3 Simple Intelligent Parking Assist Indication Pattern 1 (Twice)*1
4 Simple Intelligent Parking Assist Indication Pattern 2 (Once)*1
5 Simple Intelligent Parking Assist Indication Pattern 2 (Twice)*1
6 Simple Intelligent Parking Assist Indication Pattern 3 (Once)*1
7 Engine Stall Warning
8 Entry and Start System Warning (Intermittent)
9 Reverse Notification
10 Door Open when Shift Lever not in P Warning
11 Brake Force Reduction Warning
12 Brake Fluid Low Warning
13 EPS Warning (Intermittent)
14 Engine Switch Operation while Driving Warning
15 Vehicle Roll-away Notification Pattern 2
16 Accelerator Depression with N Position
17 Accelerator Depression Hold Warning
18 Lane Departure Alert Warning*2
19 Warning Buzzer for Shift Lever in P Advice
20 Hybrid System Warning (Intermittent: 0.2 seconds cycle)
21 Hybrid System Warning (Intermittent: 0.4 seconds cycle)
22 Hybrid System Warning (Intermittent: 0.7 seconds cycle)
23 Hybrid System Warning (Intermittent: 1.2 seconds cycle)
24 Hybrid System Warning (Continuous)
25 Hybrid System Warning (Once)
26 Towing Prohibition Notification
27 Vehicle Roll-away Notification Pattern 1
28 Parking Brake Engaged Warning
29 HV Battery Low Warning (SOC: 18 % or less)
30 Brake System Temperature Warning/Active Test
31 Speed Limit Exceed Warning*3
32 Engine Oil Pressure Warning
33 Hands off Steering Wheel Warning*2
34 Lane Departure Alert System Cancel Warning*2
35 Seat Belt Warning (Level 2)
36 Seat Belt Warning (Level 1)
37 Alert Buzzer for Driving with Door Ajar
38 Entry and Start System Warning (Intermittent, Maximum 9 Times)
39 HV Battery Low Warning (SOC: 25 % or less)
40 Engine Start while Driving Notice
41 Sport Shift Reject Warning
42 EV Driving Mode Reject Warning
43 Low Speed Zone Leading Vehicle Lost Warning*2
44 Dynamic Radar Cruise Control Cancellation due to Low Speed Warning*2
45 Vehicle Sway Warning*2
46 Road Sign Assist Indication*4
47 EPS Warning (Once)
48 Engine Coolant Temperature Warning
49 Hybrid Unit Overheat Warning
50 Brake Hold Warning
51 Multi-information Display Warning
52 Engine Malfunction Warning
53 Light Reminder
54 HV Battery Low Cooling Performance Warning
55 Entry and Start System Warning (Once)
56 Immobiliser Certification Notification
57 Turn Signal/Hazard Warning Operation



b.

Multi-information Display

i.

Display Function Flow

·

The multi-information display can be switched as shown in the flow chart below:

Y209333E01
0.354,0.354 1.594,0.563 1.24,0.208 10 false Warning Display*c 2.75,0.677 3.115,0.885 0.365,0.208 10 false OFF 3.167,0.26 3.531,0.469 0.365,0.208 10 false *a 1.927,0.51 2.292,0.719 0.365,0.208 10 false *b 1.938,0.76 2.302,0.969 0.365,0.208 10 false *a 4.094,0.5 4.458,0.708 0.365,0.208 10 false *b 4.115,0.75 4.479,0.958 0.365,0.208 10 false *a 4.885,0.354 6.615,0.635 1.729,0.281 10 false Door Unlock Mode Display 0.479,1.25 3.052,1.49 2.573,0.24 10 false Power Switch off to on (ACC) or on (ON) 4.531,1.26 6.51,1.531 1.979,0.271 10 false Power Switch off to on (Ready) 3.729,1.823 4.802,2.063 1.073,0.24 10 false Opening Display 0.25,2.625 1.385,3.135 1.135,0.51 10 false Diagnosis Trouble Code 0.25,4.073 1.323,4.313 1.073,0.24 10 false Interrupt Display 1.719,2.521 2.083,2.729 0.365,0.208 10 false *b 1.771,4 2.135,4.208 0.365,0.208 10 false *b 1.771,2.969 2.135,3.177 0.365,0.208 10 false *a 1.792,4.469 2.156,4.677 0.365,0.208 10 false *a 3,2.792 4.396,3.063 1.396,0.271 10 false Information Display*d 2.479,3.271 4.188,3.521 1.708,0.25 10 false 1. Drive Information Tab 2.469,3.667 4.49,3.927 2.021,0.26 10 false 2. Navigation Information Tab*1 2.469,4.115 4.49,4.375 2.021,0.26 10 false 3. Audio Information Tab*2 2.469,4.552 4.75,5.042 2.281,0.49 10 false 4. Driving Assist System Information Tab*3 2.469,5.229 4.49,5.49 2.021,0.26 10 false 5. Warning Message Tab 2.469,5.708 4.49,5.969 2.021,0.26 10 false 6. Setting Tab 5.625,4.063 6.813,4.458 1.188,0.396 10 false Warning Display*c 5.281,3.979 5.646,4.188 0.365,0.208 10 false *b 5.198,4.427 5.563,4.635 0.365,0.208 10 false *a 2.229,6.896 2.594,7.104 0.365,0.208 10 false *a 3.708,7.385 4.073,7.594 0.365,0.208 10 false *e 2.01,7.698 2.375,7.906 0.365,0.208 10 false *b 0.469,6.958 1.656,7.354 1.188,0.396 10 false Warning Display*c 2.75,6.948 4.729,7.302 1.979,0.354 10 false Power Switch on (IG) to off 3.542,7.771 4.021,8.042 0.479,0.271 10 false OFF 0.208,8.198 2.479,8.448 2.271,0.25 10 false *1: Models with Navigation System 0.208,8.542 2.854,8.771 2.646,0.229 10 false *2: Models with Display Audio System 3.906,8.188 6.333,8.604 2.427,0.417 10 false *3: Models with Toyota Safety Sense

Item Display Change Condition
*a Conditions are met.
*b Conditions are not met.
*c If there are multiple display requests, items will be displayed in sequence
*d Item or display is selected by operating the steering pad switch
*e The ending display is displayed for a certain period of time after the power switch is turned off.



ii.

Display Tab Operation

·

The information currently displayed can be switched using the RIGHT/LEFT switch of the steering pad switch assembly.

Y251346C01
0.625,0.51 0.792,0.51 0.792,0.51 2.344,1.75 true 4.344,2.365 4.51,2.365 4.51,2.365 4.927,1.854 true 5.385,1.708 5.667,1.229 5.667,1.229 5.833,1.229 true 0.438,0.406 0.75,0.563 0.313,0.156 10 false *1 4.146,2.26 4.458,2.417 0.313,0.156 10 false *a 5.844,1.115 6.156,1.271 0.313,0.156 10 false *b 0.188,3.896 0.5,4.052 0.313,0.156 10 false *c 2.052,3.896 2.813,4.198 0.76,0.302 10 false *d (*A) 3.938,3.896 4.531,4.063 0.594,0.167 10 false *e (*B) 5.823,3.896 6.5,4.115 0.677,0.219 10 false *f (*C) 3.927,5.719 4.208,6.01 0.281,0.292 10 false *g 2.063,5.74 2.375,5.896 0.313,0.156 10 false *h 0.313,7.417 0.625,7.573 0.313,0.156 10 false *i
*A Models with Navigation System *B Models with Display Audio System
*C Models with Toyota Safety Sense - -
*1 Steering Pad Switch Assembly - -
*a LEFT Switch *b RIGHT Switch
*c Drive Information Tab *d Navigation Information Tab
*e Audio Information Tab *f Driving Assist System Information Tab
*g Warning Message Tab *h Setting Tab
*i The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen. - -
V100136

RIGHT switch operation
V100135

LEFT switch operation




iii.

Drive Information

·

The drive information tab shows vehicle information such as drivable range and fuel consumption.

·

The drive information display can be changed using the UP/DOWN switch of the steering pad switch assembly.

Y251408C01
5.167,1.333 5.5,0.917 5.5,0.917 5.667,0.917 true 4.417,2.333 4.583,2.333 4.583,2.333 5.083,1.75 true 2.323,1.542 1.531,0.208 1.531,0.208 1.365,0.208 true 1.177,0.115 1.469,0.417 0.292,0.302 10 false *1 5.729,0.823 6.042,1.021 0.313,0.198 10 false *a 4.177,2.25 4.49,2.448 0.313,0.198 10 false *b 0.177,3.667 0.49,3.865 0.313,0.198 10 false *c 2.073,3.667 2.385,3.865 0.313,0.198 10 false *d 3.99,3.667 4.302,3.865 0.313,0.198 10 false *e 2.104,6.115 2.417,6.313 0.313,0.198 10 false *h 3.979,6.094 5.052,6.292 1.073,0.198 10 false *g 5.885,3.667 6.198,3.865 0.313,0.198 10 false *f 0.115,7.531 0.427,7.729 0.313,0.198 10 false *j 0.188,6.115 0.5,6.313 0.313,0.198 10 false *i
*1 Steering Pad Switch Assembly - -
*a UP Switch *b DOWN Switch
*c Drive Information 1 *d Drive Information 2
*e Energy Monitor *f Digital Vehicle Speed and Cruising Range Display
*g G Monitor *h EV % Display
*i Blank *j The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen.
V100136

DOWN switch operation
V100135

UP switch operation




iv.

Setting Function

·

The items displayed on the multi-information display can be customized.

·

The following items can be selected on the information setting screen.

Lane Departure Alert System (Models with Toyota safety sense)
Item Available Setting
Steering Assist

Setting for steering assist can be set to on/off:

-

On

-

Off



Warning Sensitivity

Alert sensitivity of alert system can be changed:

-

High

-

Standard



Vehicle Sway Warning

Vehicle sway warning can be selected:

-

On

-

Off



Vehicle Sway Warning Sensitivity

Vehicle sway warning sensitivity can be selected:

-

High

-

Standard

-

Low




Pre-collision System (Models with Toyota safety sense)
Item Available Setting
PCS

The pre-collision system can be set to on/off:

-

On

-

Off



The pre-collision system warning timing

The pre-collision system warning timing can be selected:

-

Far (Icon is displayed)

-

Middle (Icon is displayed)

-

Near (Icon is displayed)




Blind Spot Monitor System (Models with Blind Spot Monitor System)
Item Available Setting
BSM

The blind spot monitor system can be set to on/off:

-

ON

-

OFF



RCTA

The RCTA function can be set to on/off:

-

ON

-

OFF



HINT:

Setting can only be changed when blind spot monitor system is ON.



Toyota Parking Assist-sensor System (Models with Toyota Parking Assist-sensor System)
Item Available Setting
TOYOTA Parking Assist-sensor System

The parking support alert system can be set to on/off:

-

On

-

Off



The buzzer volume can be selected:

-

1 (Icon is displayed)

-

2 (Icon is displayed)

-

3 (Icon is displayed)




Parking Support Brake System (Models with Parking Support Brake System)
Item Available Setting
PKSB

The parking support brake system can be set to on/off:

-

On

-

Off




Road Sign Assist (Models with road sign assist system)
Item Available Setting
Road Sign Assist

The road sign assist system can be set to on/off:

-

ON

-

OFF




Drive Mode
Item Available Setting
Drive Mode

The drive mode can be changed:

-

SPORT

-

NORMAL

-

ECO




Instrument Panel Light
Item Available Setting
Display Brightness Select to adjust brightness of the instrument panel light.

Vehicle settings
Item Available Setting

*: Models with road sign assist system

Road Sign Assist Setup* Notification Method

Select to change the notification method of the following warnings between No Notification, Only Visual and Visual and Audible:

-

Excess Speed

Warns the driver if the vehicle exceeds the speed on the speed limit sign displayed on the multi-information display.


-

Others

Warns the driver if the system determines that the vehicle is overtaking when a no overtaking sign is displayed on the multi-information display.




Notification Level

Select to set the speed threshold over which the excess speed warning starts to operate when a speed limit sign is displayed on the multi-information display.

-

2 km/h (1 mph)

-

5 km/h (3 mph)

-

10 km/h (5 mph)



TPMS Setup The tire pressure monitor system can be initialized.

Meter Settings
Item Available Setting

*: Models with display audio system

Language

The language used on the multi-information display can be selected:

-

English (Default)

-

German

-

French

-

Spanish

-

Italian

-

Portuguese

-

Dutch

-

Swedish

-

Norwegian

-

Danish

-

Russian

-

Finnish

-

Greek

-

Polish

-

Ukrainian

-

Turkish

-

Hungarian

-

Czech

-

Slovak

-

Romanian



Unit

The unit displayed on the multi-information display can be selected:

-

km (km/L)

-

km (L/100 km)

-

miles (MPG)



EV Mode Indicator Light

The EV Mode Indicator Light can be switched:

-

ON (Default)

-

OFF



Drive Information 1

2 items can be selected among the following:

-

Current Fuel Consumption (Bar Display) (Default of upper area)

-

Current Fuel Consumption (Value Display)

-

Total Average Fuel Consumption between Rest Operations (Default of lower area)

-

Average Fuel Consumption after Hybrid System Start-up

-

Average Fuel Consumption after Refueling

-

Total Average Vehicle Speed between Reset Operations

-

Average Vehicle Speed after Hybrid System Start-up

-

Total Elapsed Time between Reset Operations

-

Elapsed Time after Hybrid System Start-up

-

Cruising Range

-

Cruising Range after Hybrid System Start-up

-

Blank



Drive Information 2

2 items can be selected among the following:

-

Current Fuel Consumption (Bar Display)

-

Current Fuel Consumption (Value Display)

-

Total Average Fuel Consumption between Rest Operations

-

Average Fuel Consumption after Hybrid System Start-up

-

Average Fuel Consumption after Refueling

-

Average Vehicle Speed after Hybrid System Start-up

-

Average Vehicle Speed after Engine Start-up

-

Total Elapsed Time between Reset Operations

-

Elapsed Time after Hybrid System Start-up

-

Cruising Range (Default of upper area)

-

Cruising Range after Hybrid System Start-up

-

Blank



Interruption Display

The following displays that appear as soon as the set conditions are met can be switched to ON (Default) or OFF:

-

Incoming Telephone Display*



Initialization The set items can be initialized.



v.

Warning Mode Function

·

When a warning is necessary, the warning display interrupts the current display on the multi-information display.

·

The buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.


Priority Display Buzzer

*1: Models with Toyota safety sense

*2: Models with Toyota parking assist-sensor system

*3: Models with Parking Support Brake System

*4: Models with blind spot monitor system

*5: Models with cruise control system

*6: Models with speed limiter control system

*7: Models with road sign assist system

*8: Models with Projector Headlight

*9: Models with washer fluid level warning system

1 2WD(FWD) TEST MODE -
2WD(FWD) CERTIFICATION MODE -
RES-1 -
RES-2 -
RESOLVER-1 NOT ADJUSTED -
RESOLVER-2 NOT ADJUSTED -
ADJUSTING LDA CAMERA*1 -
ADJUSTING FRONT RADAR BEAM*1 -
ADJUSTING FRONT RADAR BEAM ERROR*1 -
ADJUSTING FRONT RADAR BEAM ALONG VERTICAL AXIS*1 -
ADJUSTING FRONT RADAR BEAM ALONG HORIZONTAL AXIS*1 -
CHECKING CRUISE CONTROL BRAKE*1 -
CHECKING PRE-CRASH BRAKE*1 -
BRAKE!*1 -
Push and Hold POWER Switch for Emergency Stop -
Shift to N Position & Push POWER Switch to Restart -
Hybrid System Stopped. Shift to P Position -
Hybrid System Stopped. Stop in a Safe Place. -
2 Switch to Brake.*1 Sounds
Press brake pedal*1 Sounds
BRAKE!*1 Sounds
Object Detected, Acceleration Reduced.*1 Sounds
Braking Power Low. Stop in a Safe Place, See Owner's Manual. Sounds
Shift to P Before Exiting Vehicle Sounds
Hybrid System Malfunction. Do Not Tow Vehicle. Sounds
Maintenance required for Traction battery at your dealer. -
DIAGNOSE TRACTION BATTERY. -
Vehicle start will soon be unavailable Maintenance required for traction battery Visit Your Dealer -
3 Shift to P Before Exiting Vehicle Sounds
Parking assist Malfunction Visit your dealer*3 Sounds
Parking assist unavailable. Clean parking assist sensor*3 Sounds
Parking assist unavailable.*3 Sounds
Check Fuel Cap Sounds
Vehicle start unavailable Until traction battery inspected Contact dealer -
Speed Limit Exceeded*6 -
4 Auto Power Off to Conserve Battery. -
5 Shift is in N Release Accelerator Before Shifting. Sounds
Depress Brake When Vehicle is Stopped. Hybrid System May Overheat. Sounds
Traction battery needs to be protected. Shift into P to restart. Sounds
6 Hybrid System Malfunction. Sounds
Check Engine. Sounds
Hybrid Battery System Malfunction. Sounds
Accelerator system Malfunction. Sounds
Hybrid system stopped. Sounds
Engine stopped. Sounds
Visit Your Dealer. Sounds
Output Power Greatly Reduced. Visit Your Dealer. Sounds
Output Power Reduced. Visit Your Dealer. Sounds
Stop in a Safe Place, See Owner's Manual. Sounds
Stop in a Safe Place within 0.5 km. Sounds
Stop in a Safe Place Within 0.3 miles. Sounds
Stop in a Safe Place Within 1.0 km. Sounds
Stop in a Safe Place Within 0.6 miles. Sounds
Stop in a Safe Place Within 1.5 km Sounds
Stop in a Safe Place Within 0.9 miles. Sounds
Stop in a Safe Place Within 2.0 km. Sounds
Stop in a Safe Place Within 1.2 miles. Sounds
Stop in a Safe Place Within 5.0 km. Sounds
Stop in a Safe Place Within 3.1 miles. Sounds
Stop in a Safe Place Within 10 km. Sounds
Stop in a Safe Place Within 6.2 miles. Sounds
Output Power Reduced. Avoid Shifting to N. Sounds
Avoid Shifting to N. Visit Your Dealer. Sounds
Hybrid System Stopped, Stop in a Safe Place. Sounds
Shift to P. See Owner's Manual. Sounds
Traction battery needs to be protected. Refrain from the use of N position. Sounds
Power Steering Malfunction. Steering Power Low. Visit Your Dealer. Sounds
Power Steering Malfunction. Steering Power Low. Visit Your Dealer. Sounds
Abnormal Voltage. Steering Power Low. Visit Your Dealer. Sounds
Abnormal Voltage. Steering Power Low. Visit Your Dealer. Sounds
Power Steering Malfunction. Visit Your Dealer. Sounds
EPB Applied. Sounds
Vehicle May Roll Out. Shift to P. Sounds
Brake Hold Fault. Depress Brake to Deactivate. Visit Your Dealer. Sounds
Brake Hold Warning. Depress Brake on Slope. Sounds
EPB Activation Incomplete. Sounds
Key Not Detected, Check Key Location. Sounds
EPB Release Unavailable, Depress Brake Pedal for EPB Release. Sounds
Release Accelerator. Sounds
7 LDA. Driver Attention Required.*1 Sounds
LDA. Hold Steering Wheel.*1 -
LDA Steering Assist Unavailable, Hold Steering Wheel.*1 Sounds
LDA. Hold Steering Wheel.*1 Sounds
EPB Frequently Operated, Wait a Minute. Sounds
8 Check Engine. Visit Your Dealer. -
Check Engine. Reduced Engine Power. Visit Your Dealer. -
Reduced Engine Power. Visit Your Dealer. -
Engine Maintenance Required. Visit Your Dealer. -
Engine Stopped. Stop in a Safe Place. Sounds
Engine Stopped. Shift to P. Sounds
Engine Stopped. Shift to N. Sounds
Strongly Depress Brake And Then Start Engine. Sounds
Depress Brake and Then Start Engine.*4 Sounds
Antilock Brake System Malfunction. Visit Your Dealer. Sounds
Engine Coolant Temperature High. Stop in a Safe Place. See Owner's Manual. Sounds
Vehicle May Roll Out. Park The Vehicle on Flat Road. Sounds
Charging System Malfunction. Stop in a Safe Place. See Owner's Manual. Sounds
Clean Radar Sensor.*1 Sounds
Cruise Control Unavailable.*1 Sounds
Cruise Control Unavailable. Depress The Brake Pedal.*1 -
Cruise Control Off. Shifted to P Position. Depress The Brake Pedal and Shift to D to Restart.*1 Sounds
LDA Unavailable.*1 Sounds
Entry & Start System Malfunction. See Owner's Manual. Sounds
Blind Spot Monitor Unavailable.*4 Sounds
Check Cruise Control System. Visit Your Dealer.*5 Sounds
Check Cruise Control System. Depress The Brake Pedal. Visit Your Dealer.*5 Sounds
Check Speed Limiter System.*6 Sounds
Lane Departure Alert Malfunction. Visit Your Dealer.*1 Sounds
Front Camera Unavailable.*1 Sounds
LDA ON. Steering Assist Active.*1 -
LDA ON. Steering Assist Inactive.*1 -
Front Camera Vision Blocked. Clean and Demist Windshield.*1 Sounds
Pre-Collision System Malfunction. Visit Your Dealer.*1 Sounds
Blind Spot Monitor System Malfunction. Visit Your Dealer.*4 Sounds
Secondary Collision Brake system Malfunction. Visit Your Dealer.*1 Sounds
Engine Oil Pressure Low. Stop in a Safe Place. See Owner's Manual. Sounds
Braking Power Low. Visit Your Dealer. Sounds
EPB Unavailable. Sounds
Check RSA System.*7 Sounds
EPB Malfunction. Visit Your Dealer. Sounds
Low 12-Volt Battery. See Owner's Manual. -
For Motorway Use Only. Beware of Stopping or Merging Vehicles!*1 -
LDA Unavailable Below Approx. 50 km/h.*1 -
LDA Unavailable Below Approx. 32 MPH.*1 -
LDA Unavailable at Current Speed.*1 -
9 Hybrid System Stopped. Steering Power Low. Sounds
Turn Power Off. Sounds
Would You Like To Take A Rest?*1 Sounds
Please Take A Rest.*1 Sounds
Key Detected in Vehicle. -
Turn Lights Off. Sounds
Window Open. Sounds
Depress Brake Pedal and Touch POWER Switch with Key. Sounds
Not Ready to Drive. Depress Brake Pedal & Push POWER Switch to Start. -
Depress Brake Pedal & Push POWER Switch to Start. -
Push POWER Switch while Turning The Steering Wheel in Either Direction. Sounds
Shift to P Position to Start. Sounds
10 Brake Hold Malfunction. Visit Your Dealer. Sounds
Brake Hold Less Effective during Icy Conditions. -
Brake Hold Active. Depress Brake and Switch to Deactivate. Sounds
Brake Hold Unavailable. Driver Door Open. Sounds
EPB Can't be Released. Close Door and Fasten Your Seatbelt. Sounds
Brake Hold Unavailable. Driver Seat Belt Unbuckled. Sounds
Brake Hold Unavailable. Hood or Trunk Open. Sounds
Depress Brake to Maintain Brake Hold. Sounds
Close Driver Door to Maintain Brake Hold. Sounds
Fasten Driver Seat Belt to Maintain Brake Hold. Sounds
Brake hold unavailable. -
Brake hold deactivated Sounds
Brake hold deactivated. Parking brake automatically applying Sounds
EPB Automatically Applied. Sounds
ICS Malfunction. Visit Your Dealer.*3 Sounds
Parking Support Brake Malfunction Visit Your Dealer*3 Sounds
Drive-Start Control Malfunction. Visit Your Dealer. Sounds
Brake Override Malfunction. Visit Your Dealer. Sounds
Reverse Speed Control Activated. Sounds
ICS Unavailable.*3 -
Parking Support Brake Unavailable*3 -
Parking Support Brake Unavailable Remove the Dirt of Rear Camera*3 -
11 RCTA Malfunction Visit Your Dealer.*3 Sounds
RCTA Unavailable.*3 Sounds
Key Battery Low. Replace Key Battery. Sounds
Engine Oil Level Low. Add or Replace Oil. -
Hybrid System Overheated. Reduced Output Power. Sounds
Headlight System Malfunction. Visit Your Dealer.*8 Sounds
Accelerator and Brake Pedals Depressed Simultaneously. -
12 Maintenance Required For Hybrid Battery Cooling Parts At Your Dealer. -
Low Washer Fluid.*9 -
Traction Control Turned OFF. -
To Activate AHB, Switch Headlights to High Beam.*1 -
Depress Brake Pedal & Push POWER Switch to Start. -
VSC Turned Off. Pre-Collision Brake System Unavailable.*1 -
Pre-Collision System Unavailable.*1 -
Front Camera Unavailable.*1 -
Front Camera Unavailable. See owner's manual.*1 -
Pre-Collision System Unavailable.*1 -
Pre-Collision System Unavailable. Clean Sensor.*1 -
EV Mode Unavailable. Sounds
EV Mode Unavailable. System Warming Up. Sounds
EV Mode Unavailable. Hybrid Battery Low. Sounds
EV Mode Unavailable. Speed Range Exceeded. Sounds
EV Mode Unavailable. Reduce Acceleration to Activate. Sounds
EV Mode Deactivated. Sounds
EV Mode Deactivated. Hybrid Battery Low. Sounds
EV Mode Deactivated. Speed Range Exceeded. Sounds
EV Mode Deactivated. Accelerator Depressed Too Far. Sounds
EPB Shift Interlock Function Activated. Sounds
EPB Shift Interlock Function Deactivated. Sounds
Pre-Collision System Off.*1 -
13 A New Key has been Registered. Contact Your Dealer for Details. -




OPERATION


a.

Hybrid System Indicator

i.

The Hybrid System Indicator will begin to operate when both of the following conditions are met:

·

The hybrid system is operating (the READY indicator light is illuminated).

·

Shift position is not in P, N or R.