Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2020.08
NM32K0E _58 Vehicle Interior _060726 PRE-COLLISION _0297886 PRE-COLLISION SYSTEM DE DETAILS F

PRE-COLLISION  PRE-COLLISION SYSTEM  DETAILS  CAMERA HEATER  


OPERATING CONDITION


a.

When all of the following conditions have been met, the forward recognition hood with heater sub-assembly operates.

·

The ignition switch is turned to ON (IG).

·

The outside air temperature is approximately 10°C or less.

·

A few minutes have elapsed since the forward recognition hood with heater sub-assembly operation stopped.



b.

After the forward recognition hood with heater sub-assembly operates, the operation will stop when a certain length of time has elapsed.

HINT:

Operating time will differ depending on vehicle conditions (vehicle speed, outside air temperature, etc.).




CONSTRUCTION


a.

The forward recognition hood with heater sub-assembly is positioned in the forward recognition bracket. The forward recognition hood with heater sub-assembly prevents condensation on the windshield in front of the forward recognition camera.

Y265471C01
3.688,1.76 4.667,1.01 4.667,1.01 4.833,1.01 true 2.99,1.906 2.5,1.083 2.5,1.083 2.333,1.083 true 2.146,1 2.458,1.156 0.313,0.156 10 false *1 4.906,0.927 5.219,1.083 0.313,0.156 10 false *2
*1 Sheet Heater (Heating Element) *2 Temperature Fuse