Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Single Knob Type) › from 2022.01
NM32K0E _56 Audio / Visual / Telematics _061597 AUDIO / VIDEO _0524637 AUDIO AND VISUAL SYSTEM(for Single Knob Type) CO CONTROL F

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Single Knob Type)  CONTROL  RADIO MODE  


FM FUNCTION


HINT:

Radio broadcasts may not be available in some areas where FM broadcasts are stopped.


a.

Radio frequency band

i.

FM radio broadcasts use the 30 MHz to 300 MHz radio frequency bands.



b.

Service area

i.
E177193C12
0.937,2.07 1.107,2.226 0.17,0.156 10 *a 1.77,3.075 1.94,3.231 0.17,0.156 10 *c 1.354,2.56 1.524,2.716 0.17,0.156 10 *b
*a FM (Stereo)
*b FM (Monaural)
*c AM


The service areas of AM and FM broadcasts are vastly different. Sometimes an AM broadcast can be received very clearly but an FM stereo broadcast cannot. FM stereo has the smallest service area, and is prone to pick up static and other types of interference such as noise.



c.

Radio reception problems

HINT:

In addition to static, other problems such as "phasing", "multipath" and "fade out" exist. These problems are not caused by electrical noise, but by the radio signal propagation method itself.


i.
E177195C12
0.103,0.084 0.298,0.237 0.194,0.153 10 *a
*a Multipath


Multipath

Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off buildings or mountains and the other signal is received directly from the transmitter.


ii.
E177196C11
0.112,0.045 0.282,0.229 0.17,0.184 10 *a
*a Fade Out


Fade out

Fade out is caused by objects (buildings, mountains and other such large obstacles) that deflect away part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions.



d.

Noise problem

Technicians must have a clear understanding about each customer's noise complaint. Use the following table to diagnose noise problems.

Radio Frequency Noise Occurrence Condition Presumable Cause
FM Noise occurs while driving in a specific area Multipath resulting from a change in FM frequency



DIGITAL AUDIO BROADCAST (DAB) FUNCTION


a.

Digital Audio Broadcast (DAB) reception is available. This mostly prevents broadcast interference, achieving clear reception with high quality sound.


b.

The time shift operation function can be used to play back DAB programs at a later time.

HINT:

The amount of playback possible depends on the bit rate of the DAB station to be recorded, the amount of DAB unit memory, and the time at which reception of the broadcast began.




INTERNET RADIO FUNCTION (Models with Internet Radio Function)


a.

Internet Radio links to the Gracenote server (metadata server) via the cloud and the latest information such as the track title and cover art can be displayed.


b.

By automatically switching to IP when the analog broadcast signal is weak, it is possible to continue to listen to the same radio station. When the analog signal can be received for 10 minutes or more, the system changes from the IP broadcast to the analog broadcast automatically.

HINT:
·

The target source for Internet Radio is AM/FM/DAB only.

·

Some broadcasting stations may not be compatible with Internet Radio.



Y283154

Gracenote, the Gracenote logo and logotype, "Powered by Gracenote" and Gracenote Music ID are either registered trademarks or trademarks of Gracenote, Inc. in the United States and/or other countries.