Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Single Knob Type) › from 2022.01
NM32K0E _56 Audio / Visual / Telematics _061598 NAVIGATION / MULTI INFO DISPLAY _0524639 NAVIGATION SYSTEM(for Single Knob Type) CO CONTROL F

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Single Knob Type)  CONTROL  WI-FI COMMUNICATION  


FUNCTION


a.

"Wi-Fi" is a worldwide wireless communication standard widely used as a short range communication tool.

Y286510C02
0.115,0.083 0.427,0.281 0.313,0.198 10 false *a 3.25,0.604 3.563,0.802 0.313,0.198 10 false *b 4.594,1.896 4.906,2.094 0.313,0.198 10 false *c 5.865,1.875 6.177,2.073 0.313,0.198 10 false *d 1.438,1.99 1.75,2.188 0.313,0.198 10 false *1
*1 Audio Head Unit - -
*a The illustrations shown are examples only. The illustrations may differ from the actual audio head unit. *b "Wi-Fi" Wireless Connection
*c Cellular Phone
("Wi-Fi" Compatible Type)
*d Mobile Wi-Fi Router
("Wi-Fi" Compatible Type)



b.

"Wi-Fi" is a registered trademark of "Wi-Fi" Alliance.


c.

The audio head unit uses the 2.4 GHz frequency band for "Wi-Fi" communication.

HINT:

The communication performance of "Wi-Fi" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.



d.

Wi-Fi Communication

i.

A wireless LAN antenna is integrated into the audio head unit, enabling Wi-Fi communication to wireless clients (User's tethering-compatible cellular phone or mobile Wi-Fi router).

HINT:
·

Wi-Fi communication may be unavailable depending the vehicle conditions, condition of the surroundings such as radio wave conditions around the radio receiver assembly, the distance to the device or device conditions. In addition, during Wi-Fi communication, communication may be cut or become unstable due to the conditions described above.

·

The connection history of the audio head unit and wireless clients are stored in the internal memory of the audio head unit. The stored data can be exported to a USB memory device as a connection history file, which can be checked using the GTS.




ii.

"Wi-Fi" is divided into two functions described in the following table.

Function Description

*: Models with "Wi-Fi" (Station)

Station Function* Function that connects the radio receiver assembly to an access point
P2P Function Function that connects the radio receiver assembly to another device directly



e.

"Wi-Fi" Hotspot (Models with "Wi-Fi" Hotspot)

i.

Using the 2.4 GHz band frequency wireless LAN built into the audio head unit, wireless clients (smartphone, tablet, laptop computer, etc.) can be connected to the access points of the Wi-Fi hotspot. The wireless clients connected via Wi-Fi to the audio head unit can access internet via the DCM (telematics transceiver).

HINT:
·

To use the Wi-Fi hotspot, it is necessary to enter a contract with a communication service provider.

·

Wi-Fi hotspot may be unavailable depending the vehicle conditions, condition of the surroundings such as radio wave conditions around the head unit, the distance to the clients or clients conditions. In addition, during Wi-Fi communication, communication may be cut or become unstable due to the conditions described above.

·

As the DCM (telematics transceiver) cannot communicate outside of the cellular communication coverage area, the internet cannot be accessed.

·

If the hands-free system, audio players or devices connected via 2.4 GHz band frequency Bluetooth are used at the same time as the Wi-Fi hotspot is being used, the data transmission speed may decrease.