Home › Engine / Hybrid System › 2ZR-FXE (EMISSION CONTROL) › PCV VALVE
RM32K0E _51 Engine / Hybrid System _060064 2ZR-FXE EMISSION CONTROL _0294232 PCV VALVE A

2ZR-FXE EMISSION CONTROL  PCV VALVE  INSTALLATION  


PROCEDURE

Hide 12204 1.INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)

a.
A092670C09
2.281,0.646 2.125,0.188 2.125,0.188 1.865,0.188 false 1.667,0.104 1.854,0.302 0.188,0.198 10 false *a
*a Adhesive 1324


Apply adhesive to 2 or 3 threads of the PCV valve (ventilation valve sub-assembly).

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



b.
A377755C01
1.396,0.406 1.854,0.698 0.458,0.292 10 false *a
*a Torque Wrench Fulcrum Length


Using a 22 mm ball joint lock nut wrench, install the PCV valve (ventilation valve sub-assembly) to the No. 1 ventilation case.

Torque:
Specified tightening torque : 20 N*m (204 kgf*cm, 15 ft.*lbf)

NOTICE:

Do not start the engine for at least 1 hour after installation.


HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a 22 mm ball joint lock nut wrench (fulcrum length of 149.75 mm (5.9 in.)) + torque wrench (fulcrum length of 162 mm (6.4 in.)): 10 N*m (102 kgf*cm, 7 ft.*lbf)




Hide 12261 2.CONNECT VENTILATION HOSE

a.
A393944C01
2.469,0.594 2.698,0.854 true 2.156,0.802 2.417,0.854 false 1.063,0.385 1.375,0.542 0.313,0.156 10 false *a 2.521,0.26 2.833,0.417 0.313,0.156 10 false *b 2.385,1.76 2.698,1.917 0.313,0.156 10 false *c 2.74,0.76 3.052,0.917 0.313,0.156 10 false *d 1.969,0.698 2.219,0.917 0.25,0.219 10 false *e
*a 4 to 10 mm (0.157 to 0.394 in.)
*b Top of Vehicle
*c 90°
*d 60°
*e Paint Mark


Connect the ventilation hose to the PCV valve (ventilation valve sub-assembly) and slide the clip to secure it.