12204
1.INSPECT VENTILATION VALVE SUB-ASSEMBLY
Install a clean hose to the PCV valve (ventilation valve sub-assembly).
Check PCV valve (ventilation valve sub-assembly) operation.
| *a | Hose |
| *b | Air |
|
No. 1 Ventilation Case Side |
Blow air into the No. 1 ventilation case side, and check that air passes through easily.
When inspecting the PCV valve (ventilation valve sub-assembly), do not suck air through the valve.
There are blow-by gas substances remaining inside the PCV valve (ventilation valve sub-assembly) that are harmful to inhale.
If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).
| *a | Hose |
| *b | Air |
|
Intake Manifold Side |
Blow air into the intake manifold side, and check that air passes through with difficulty.
When inspecting the PCV valve (ventilation valve sub-assembly), do not suck air through the valve.
There are blow-by gas substances remaining inside the PCV valve (ventilation valve sub-assembly) that are harmful to inhale.
If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).
Remove the hose from the PCV valve (ventilation valve sub-assembly).