Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM
RM32K0E _54 Brake _060044 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0294924 ELECTRONICALLY CONTROLLED BRAKE SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM  C1433  Steering Angle Sensor Internal Circuit  


DESCRIPTION

The skid control ECU (brake booster with master cylinder assembly) outputs this DTC when it receives an internal malfunction signal from the steering angle sensor.

DTC No. Detection Item INF Code DTC Detection Condition Trouble Area Note
C1433 Steering Angle Sensor Internal Circuit 702 When the lG1 terminal voltage is 9.5 V or more, a malfunction signal from the steering angle sensor is detected. Steering angle sensor VSC DTC

PROCEDURE

1.REPLACE STEERING ANGLE SENSOR
a.

Result:
Proceed to
NEXT



NEXT

END