If the skid control ECU (brake booster with master cylinder assembly) detects an internal sensor (reaction force pressure sensor, accumulator pressure sensor or servo pressure sensor) malfunction during self-diagnosis, DTCs are stored.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|---|
| C14B0 | Reaction Force Pressure Sensor Power Supply Voltage Malfunction | 201 | The supplied voltage to the sensor is less than 6.3 V or 7.7 V or more for 0.05 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14B1 | Reaction Force Pressure Sensor Communication Malfunction | 202 | Communication with the sensor is invalid for 0.05 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14B2 | Reaction Force Pressure Sensor Internal Malfunction | 203 | A malfunction is detected by self-diagnosis function of the sensor. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14B4 | Reaction Force Pressure Sensor Output Malfunction | 207 | Fluctuation of the sensor signal exceeds the threshold (7.5 MPa (76.5 kgf/cm2, 1088 psi) or more from the previous value) for 0.1 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14B5 | Reaction Force Pressure Sensor Data Invalid | 208 | Data from the sensor is invalid for 0.2 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14C0 | Servo Pressure Sensor Power Supply Voltage Malfunction | 421 | The supplied voltage to the sensor is less than 6.3 V or 7.7 V or more for 0.05 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14C1 | Servo Pressure Sensor Communication Malfunction | 422 | Communication with the sensor is invalid for 0.05 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14C2 | Servo Pressure Sensor Internal Malfunction | 423 | A malfunction is detected by self-diagnosis function of the sensor. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14C4 | Servo Pressure Sensor Output Malfunction | 426 | Fluctuation of the sensor signal exceeds the threshold (7.5 MPa (76.5 kgf/cm2, 1088 psi) or more from the previous value) for 0.1 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14C5 | Servo Pressure Sensor Data Invalid | 427 | Data from the sensor is invalid for 0.2 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14D0 | Accumulator Pressure Sensor Power Supply Voltage Malfunction | 331 | The supplied voltage to the sensor is less than 6.3 V or 7.7 V or more for 0.05 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14D1 | Accumulator Pressure Sensor Communication Malfunction | 332 | Communication with the sensor is invalid for 0.2 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14D2 | Accumulator Pressure Sensor Internal Malfunction | 335 | A malfunction is detected by self-diagnosis function of the sensor. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14D3 | Accumulator Pressure Sensor Output Malfunction | 333 | Fluctuation of the sensor signal exceeds the threshold (7.5 MPa (76.5 kgf/cm2, 1088 psi) or more from the previous value) for 0.1 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
| C14D4 | Accumulator Pressure Sensor Data Invalid | 336
337 |
·
INF Code: 336 -
Data from the sensor is invalid for 0.8 seconds or more. ·
INF Code: 337 -
ECU internal malfunction. (A sensor malfunction is detected by the internal IC.) |
Skid control ECU (brake booster with master cylinder assembly) | Electronically controlled brake system DTC |
After replacing the skid control ECU (brake booster with master cylinder assembly), perform linear solenoid valve offset learning, ABS holding solenoid valve learning, yaw rate and acceleration sensor zero point calibration and system information memorization after performing "Reset Memory".
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>INITIALIZATION
Clear the DTCs.
Turn the power switch off.
Turn the power switch on (IG).
Check if the same DTC is output.
| Result | Proceed to |
|---|---|
| DTCs C14B0, C14B1, C14B2, C14B4, C14B5, C14C0, C14C1, C14C2, C14C4, C14C5, C14D0, C14D1, C14D2, C14D3 and/or C14D4 are output. (for LHD) | A |
| DTCs C14B0, C14B1, C14B2, C14B4, C14B5, C14C0, C14C1, C14C2, C14C4, C14C5, C14D0, C14D1, C14D2, C14D3 and/or C14D4 are output. (for RHD) | B |
| DTCs C14B0, C14B1, C14B2, C14B4, C14B5, C14C0, C14C1, C14C2, C14C4, C14C5, C14D0, C14D1, C14D2, C14D3 and/or C14D4 are not output. | C |
A
B
C
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING