Home › Engine / Hybrid System › 2ZR-FXE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM32K0E _51 Engine / Hybrid System _060312 2ZR-FXE ENGINE CONTROL _0295700 CAMSHAFT OIL CONTROL VALVE A

2ZR-FXE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  REMOVAL  


PROCEDURE

Hide 11101J 1.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.
A394185

Disconnect the camshaft timing oil control valve assembly connector.


b.

Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

NOTICE:
·

Do not allow foreign matter to contact the oil seal surface of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.




c.
A223751C01
1.74,0.844 1.323,0.281 1.323,0.281 1.031,0.281 false 0.844,0.208 1.156,0.406 0.313,0.198 10 *1
*1 O-ring


Remove the O-ring from the camshaft timing oil control valve assembly.