Home › Engine / Hybrid System › 2ZR-FXE (ENGINE CONTROL) › MASS AIR FLOW METER
RM32K0E _51 Engine / Hybrid System _060312 2ZR-FXE ENGINE CONTROL _0295703 MASS AIR FLOW METER A

2ZR-FXE ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


PROCEDURE

Hide 22204 1.INSTALL MASS AIR FLOW METER

HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter.

Click hereEngine / Hybrid System>2ZR-FXE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Install the mass air flow meter to the air cleaner cap sub-assembly with the 2 screws.

NOTICE:
·

If the mass air flow meter has been struck or dropped, replace it.

·

If reusing the mass air flow meter, be sure to inspect the O-ring.

·

Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter.




b.

Connect the mass air flow meter connector.


Hide 2.PERFORM INITIALIZATION

a.

Perform "Inspection After Repair" after replacing the mass air flow meter.

Click hereEngine / Hybrid System>2ZR-FXE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION