Home › Engine / Hybrid System › 2ZR-FXE (ENGINE CONTROL) › CAMSHAFT POSITION SENSOR
RM32K0E _51 Engine / Hybrid System _060312 2ZR-FXE ENGINE CONTROL _0295704 CAMSHAFT POSITION SENSOR A

2ZR-FXE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 11101E 1.REMOVE CAMSHAFT POSITION SENSOR

a.
A394200

Disconnect the No. 1 fuel vapor feed hose from the fuel vapor feed pipe.


b.
A394201

Disconnect the camshaft position sensor connector.


c.

Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

NOTICE:

If a camshaft position sensor has been struck or dropped, replace it.