Home › Power Source / Network › NETWORKING › NETWORK GATEWAY ECU(for RHD)
RM32K0E _57 Power Source / Network _059857 NETWORKING _0298009 NETWORK GATEWAY ECU(for RHD) A

NETWORKING  NETWORK GATEWAY ECU(for RHD)  REMOVAL  


PROCEDURE

Hide 55433B 1.REMOVE NO. 2 INSTRUMENT PANEL LOWER FINISH PANEL

Hide 82878 2.REMOVE ECU INTEGRATION BOX LH

a.
E357159

Disconnect the 5 connectors as shown in the illustration.


b.
E357161

Disconnect the 5 connectors.


c.
E357162

Remove the bolt, nut and ECU integration box LH.


Hide 89111 3.REMOVE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)

a.

Disengage the claws to remove the central gateway ECU (network gateway ECU).

E357163

NOTICE:
·

If the ECU integration box LH is deformed or damaged, replace it.

·

Do not bend the claws more than necessary.