Home › Drivetrain › P610 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT LEVER
RM32K0E _52 Drivetrain _059722 P610 HYBRID TRANSMISSION / TRANSAXLE _0293793 SHIFT LEVER G

P610 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LEVER  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.SECURE VEHICLE

a.

Fully apply the parking brake and chock a wheel.

CAUTION:
·
C332327

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 2.INSPECT SHIFT LEVER POSITION

a.

When moving the shift lever from P to each position with the power switch on (IG) and the brake pedal depressed, check that the shift lever moves smoothly and correctly into position.


b.

Start the engine and check that the vehicle moves forward when the shift lever is moved from N to D and moves rearward when the shift lever is moved to R.

If the operation is not as specified, inspect the park/neutral position switch assembly and shift lever assembly.


Hide 3.INSPECT SHIFT LOCK OPERATION

a.

Move the shift lever to P.


b.

Turn the power switch off.


c.

Check that the shift lever cannot be moved from P to any other position.


d.

Turn the power switch on (IG), depress the brake pedal, and check that the shift lever can be moved to another position.

If the operation is not as specified, inspect the shift lever assembly.


Hide 4.INSPECT SHIFT LOCK RELEASE BUTTON OPERATION

a.

Move the shift lever to P.


b.

Turn the power switch off.


c.

Remove the shift lever cap.


d.

When moving the shift lever with the shift lock release button pressed, check that the shift lever can be moved from P to any other position.

If the operation is not as specified, inspect the shift lever assembly.


e.

Install the shift lever cap.