Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › 2016.10–2020.08
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0299231 AUTOMATIC HIGH BEAM SYSTEM L

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  PRECAUTION  


HANDLING PRECAUTIONS FOR FORWARD RECOGNITION CAMERA


a.

The automatic high beam system uses the forward recognition camera. For precautions related to the forward recognition camera, refer to Precaution for Forward Recognition Camera System.

Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)



PRECAUTION WHEN REPLACING COMBINATION METER ASSEMBLY


a.

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.