Home › General › MAINTENANCE › TIRE AND WHEEL › 2016.10–2019.09
RM32K0E _V1 General _059911 MAINTENANCE _0299376 TIRE AND WHEEL A

MAINTENANCE  TIRE AND WHEEL  REMOVAL  


PROCEDURE

Hide 1.REMOVE WHEEL ASSEMBLY

a.

for 16 inch Aluminum Wheel:

i.
C367267C01
0,0 0,0 false
V100155

Fastening Tape
V113146

Place Hands Here
V113147

Remove in this Direction


Disengage the claws, fastening tapes and pins to remove the wheel cap as shown in the illustration.

CAUTION:
·
C371544C01
0.594,1.896 1.156,1.896 true 0.427,1.823 0.74,1.979 0.313,0.156 10 false *1
*1 Wheel Cap


Do not remove or carry the wheel assembly with the wheel cap still installed.

·

The wheel cap could detach and cause injury or damage.



NOTICE:

When removing the wheel cap, disengage each location where your hands are placed one by one, and do not attempt to disengage everything at once.


HINT:

When replacing the disc wheel, also replace the wheel cap with a new one.




b.

Loosen the axle hub nuts approximately 90°.


c.

Lift up the vehicle and remove the axle hub nuts and wheel assembly.