Home › General › SPECIFICATIONS › DRIVE SHAFT / PROPELLER SHAFT › 2016.10–2019.09
RM32K0E _V1 General _059401 SPECIFICATIONS _0299469 DRIVE SHAFT / PROPELLER SHAFT F

SPECIFICATIONS  DRIVE SHAFT / PROPELLER SHAFT  SERVICE DATA  


Front Drive Shaft Assembly
Front drive shaft assenbly LH length Standard 590.5 mm (1.94 ft.)
Front drive shaft assenbly RH length Standard 887.1 mm (2.91 ft.)
Outboard joint boot grease capacity (for LH Side) Standard 80 to 100 g (2.83 to 3.52 oz.)
Front drive shaft damper LH distance Standard 184 to 188 mm (7.24 to 7.40 in.)
Front drive shaft damper RH distance Standard 434 to 438 mm (1.424 to 1.436 ft.)
Inboard joint boot grease capacity(for LH Side) Standard 195 to 215 g (6.88 to 7.58 oz.)
Inboard joint boot grease capacity(for RH Side) Standard 130 to 150 g (4.59 to 5.29 oz.)