Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER WIRE
RM32K0E _59 Vehicle Exterior _061311 WINDOW / GLASS _0299594 WINDOW DEFOGGER WIRE A

WINDOW / GLASS  WINDOW DEFOGGER WIRE  REPAIR  


PROCEDURE

Hide 68131 1.REPAIR BACK DOOR GLASS

B106758C25
1.719,0.99 1.719,1.49 true 0.5,0.875 0.5,1.375 false 1.594,0.49 1.833,0.229 false 0.448,1.375 0.76,1.531 0.313,0.156 10 false *1 1.865,0.094 2.177,0.25 0.313,0.156 10 false *2 1.667,1.5 1.979,1.656 0.313,0.156 10 false *a
*1 Broken Wire
*2 Masking Tape
*a Repair Point


a.

Clean the broken wire tips with grease, wax and silicone remover.


b.

Place masking tape along both sides of the wire.


c.

Thoroughly mix the repair agent.


d.
B106759C02
2.083,1.667 2.583,1.667 false 1.917,0.333 2.333,0.333 false 1.74,0.271 2.052,0.427 0.313,0.156 10 *1 2.625,1.594 2.938,1.75 0.313,0.156 10 *a
*1 Fine Tip Brush
*a Repair Point


Using a fine tip brush, apply a small amount of the agent to the wire.


e.

After a few minutes, remove the masking tape.

NOTICE:

Do not repair the defogger wire again for at least 24 hours.