Home › Vehicle Interior › HEATING / AIR CONDITIONING › REFRIGERANT LINE › 2016.10–2019.09
RM32K0E _58 Vehicle Interior _061609 HEATING / AIR CONDITIONING _0300401 REFRIGERANT LINE A

HEATING / AIR CONDITIONING  REFRIGERANT LINE  REMOVAL  


PROCEDURE

Hide 2.REMOVE PIPING CLAMP (for Suction Hose Sub-assembly)

a.

While pressing the end of the suction hose sub-assembly into the end of the suction pipe sub-assembly, use pliers to squeeze together both sides of the piping clamp until it breaks apart.

I112436C01
4.406,2.24 4.406,2.656 false 6.552,2.26 6.552,2.677 false 0.74,0.458 1.365,0.281 1.365,0.281 0.76,0.802 true 6.479,2.719 6.792,2.875 0.313,0.156 10 false *1 4.333,2.698 4.646,2.854 0.313,0.156 10 false *2 1.427,0.198 1.74,0.354 0.313,0.156 10 false *3 4.927,0.635 5.24,0.792 0.313,0.156 10 false *a
*1 Suction Pipe Sub-assembly *2 Suction Hose Sub-assembly
*3 Piping Clamp - -
*a Press In - -


NOTICE:
·

If any foreign matter is adhered to the connecting part, brush it off or use compressed air to remove it.

·

Make sure that fragments of the piping clamp do not enter the piping.




b.

Disconnect the suction hose sub-assembly.

NOTICE:

Clean off any foreign matter near the ends of the suction hose sub-assembly and suction pipe sub-assembly.



c.

Remove the 2 O-rings from the suction hose sub-assembly.

NOTICE:

Wrap the open ends of the separated suction pipe sub-assembly and suction hose sub-assembly with vinyl tape to prevent entry of moisture and foreign matter.



d.

Remove the piping clamp.


Hide 3.REMOVE PIPING CLAMP (for Cooler Refrigerant Liquid Pipe A)