Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT
RM32K0E _58 Vehicle Interior _061609 HEATING / AIR CONDITIONING _0300403 BLOWER UNIT A

HEATING / AIR CONDITIONING  BLOWER UNIT  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The following procedure is for the LHD vehicles.



PROCEDURE

Hide 87130K 1.INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY

a.
E339327C02
0.792,0.229 1.313,0.417 true 2.646,0.792 3.104,0.365 true 0.594,0.135 0.813,0.344 0.219,0.208 10 true *a 3.156,0.25 3.375,0.458 0.219,0.208 10 true *a
*a Link


Connect the 2 links of the blower assembly to the 2 plates of the No. 1 blower damper servo sub-assembly as shown in the illustration.


b.

Install the No. 1 blower damper servo sub-assembly with the 2 screws.


Hide 87103B 2.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY

a.
E339328

Install the blower motor with fan sub-assembly with the 3 screws.

NOTICE:

Replace the blower motor with fan sub-assembly if it has been dropped or subjected to a severe impact.



Hide 87139C 3.INSTALL CLEAN AIR FILTER

a.

Engage the guides on the cutout side of the cooling unit parts and then engage the guides as shown in the illustration to install the clean air filter.

E344192C04
4.365,2.729 4.365,2.094 true 1.927,4.25 2.208,4.167 false 4.302,2.75 4.615,2.906 0.313,0.156 10 false *a 2.25,4.083 2.563,4.24 0.313,0.156 10 false *b
*a Cutout *b Rib
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


NOTICE:
·

Make sure that the "UP" marks are facing the correct direction before installing the clean air filter.

·

Make sure that there is no clearance between the clean air filter and cooling unit parts and that the clean air filter is not deformed.




b.
E339325C02
0,0 0,0 false
V113147

Install in this Direction


Install the air filter sub-assembly as shown in the illustration.

NOTICE:

Make sure that the "UP" mark is facing the correct direction before installing the air filter sub-assembly.



Hide 88899M 4.INSTALL AIR FILTER COVER PLATE

a.
E339323C02
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the guides and claw as indicated by the arrows, in the order shown in the illustration to install the air filter cover plate.