Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › RELAY
RM32K0E _58 Vehicle Interior _061197 THEFT DETERRENT / KEYLESS ENTRY _0301160 RELAY G

THEFT DETERRENT / KEYLESS ENTRY  RELAY  INSPECTION  


PROCEDURE

Hide 89730A 1.INSPECT SECURITY WARNING RELAY

a.
E222294N47
1.073,0.958 1.302,0.49 1.302,0.49 1.438,0.49 true 1.063,1.333 1.146,1.75 1.146,1.75 1.344,1.75 true 0.802,1.01 0.938,0.49 0.938,0.49 1.063,0.49 true 0.563,1.281 0.635,1.76 0.635,1.76 0.823,1.76 true 1.458,0.406 1.563,0.563 0.104,0.156 10 false 1 1.375,1.667 1.479,1.823 0.104,0.156 10 false 2 1.094,0.396 1.198,0.552 0.104,0.156 10 false 5 0.844,1.667 0.948,1.823 0.104,0.156 10 false 3

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Connection
3 - 5 Auxiliary battery voltage applied to terminal 1 and 2 Below 1 Ω
3 - 5 Auxiliary battery voltage not applied to terminal 1 and 2 10 kΩ or higher


If the result is not as specified, replace the security warning relay.