Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM
RM32K0E _59 Vehicle Exterior _061789 WIPER / WASHER _0301221 WIPER AND WASHER SYSTEM U

WIPER / WASHER  WIPER AND WASHER SYSTEM  FAIL-SAFE CHART  


RAIN SENSOR FAIL-SAFE FUNCTION


a.

The windshield wiper switch assembly performs the fail-safe function when the wiper system cannot properly receive the necessary signals for wiper system control or a wiper system component is malfunctioning.

Item Fail-safe Function Conditions to Return to Normal Condition
Rain sensor LIN communication error Continues control according to the conditions detected before the malfunction LIN communication returns to normal.
Rain sensor voltage is too low Rain sensor voltage returns to normal.
Abnormal rain sensor signal Performs intermittent operation according to the position of the auto sensitivity adjustment switch. The rain sensor returns to normal.
The rain sensor temperature is too high (90°C (194°F) or higher). Stops the wiper operation
The rain sensor temperature is too low (-15°C (5°F) or lower).