Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › GRILLE SHUTTER SYSTEM › 2016.10–2019.09
RM32K0E _59 Vehicle Exterior _061792 EXTERIOR PANELS / TRIM _0301245 GRILLE SHUTTER SYSTEM U

EXTERIOR PANELS / TRIM  GRILLE SHUTTER SYSTEM  TERMINALS OF ECU  


CHECK SWING GRILLE ACTUATOR ASSEMBLY


B438341N04
3.396,0.188 3.76,0.438 0.365,0.25 3.469,0.24 3.927,0.438 0.458,0.198 10 false A32

a.

Disconnect the A32 swing grille actuator assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Tester Connection Wiring Color Terminal Description Condition Specified Condition
A32-1 (+B) - Body ground B - Body ground Auxiliary battery power supply Power switch off 11 to 14 V
A32-3 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω