Home › Steering › STEERING COLUMN › STEERING PAD SWITCH › 2016.10–2019.09
RM32K0E _55 Steering _061343 STEERING COLUMN _0299715 STEERING PAD SWITCH G

STEERING COLUMN  STEERING PAD SWITCH  INSPECTION  


PROCEDURE

Hide 84250A 1.INSPECT STEERING PAD SWITCH ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

C365798C01
2.167,0.667 2.51,0.833 0.344,0.167 5.125,0.896 5.469,1.063 0.344,0.167 2.177,0.969 1.917,0.719 false 4.115,1 3.792,0.656 true 4.281,1 4.073,0.469 true 4.438,0.99 4.427,0.448 true 4.615,1 4.885,0.396 true 5.177,1.656 4.729,1.26 true 4.948,1.844 4.594,1.25 true 4.448,1.677 4.438,1.26 true 4.146,1.667 4.323,1.281 true 3.323,1.479 4.135,1.26 true 1.677,2.927 1.115,2.573 true 1.479,3 1.083,3 true 1.5,3.188 0.885,3.188 true 2.51,2.698 1.896,2.698 true 2.396,2.917 1.927,2.917 true 2.448,3.156 1.885,3.24 true 1.271,3.99 1.594,3.448 true 1.292,3.51 0.896,3.51 true 5.333,2.125 5.104,2.354 true 5.708,2.281 5.479,2.51 true 5.802,2.583 5.458,2.917 true 5.229,2.667 4.656,2.667 true 5.229,2.938 4.719,2.99 true 5.333,3.354 5.344,3.677 true 5.594,3.479 5.813,4.042 true 6.302,3.448 5.833,3.448 true 6.063,2.958 5.667,2.958 true 6.031,3.167 5.635,3.167 true 0.156,0.115 0.469,0.271 0.313,0.156 10 false *a 2.448,2.813 2.76,2.969 0.313,0.156 10 false *b 0.875,2.875 1.188,3.031 0.313,0.156 10 false *c 2.563,2.604 2.875,2.76 0.313,0.156 10 false *d 0.698,3.052 1.01,3.208 0.313,0.156 10 false *e 0.969,2.479 1.281,2.635 0.313,0.156 10 false *f 2.5,3.042 3.021,3.323 0.521,0.281 10 false *g (*B) 0.448,3.427 1,3.677 0.552,0.25 10 false *h (*D) 4.49,2.594 5.01,2.813 0.521,0.219 10 false *j 6.083,3.073 6.396,3.229 0.313,0.156 10 false *k 4.573,2.917 4.885,3.073 0.313,0.156 10 false *l 6.115,2.865 6.427,3.021 0.313,0.156 10 false *m 5.833,2.479 6.146,2.635 0.313,0.156 10 false *n 5.75,2.167 6.063,2.323 0.313,0.156 10 false *o 6.365,3.333 6.854,3.646 0.49,0.313 10 false *p (*A) 5.354,2 5.583,2.229 0.229,0.229 10 false *q 5.24,3.719 5.688,3.958 0.448,0.24 10 false *r (*A) 5.854,3.958 6.354,4.229 0.5,0.271 10 false *s (*C) 1.688,0.625 2.01,0.792 0.323,0.167 10 false HO 2.281,0.677 2.479,0.854 0.198,0.177 10 false A 5.219,0.896 5.531,1.094 0.313,0.198 10 false z1 3.563,0.563 3.885,0.729 0.323,0.167 10 false HO 3.927,0.292 4.25,0.458 0.323,0.167 10 false +DP 4.271,0.281 4.708,0.448 0.438,0.167 10 false +DP2 4.917,0.292 5.635,0.542 0.719,0.25 10 false DIST (*A) 5.25,1.573 5.906,1.75 0.656,0.177 10 false AU1 5,1.771 5.656,1.948 0.656,0.177 10 false AU2 4.25,1.708 4.865,1.969 0.615,0.26 10 false ASL (*C) 3.833,1.594 4.292,1.792 0.458,0.198 10 false EAU 2.417,1.396 3.385,1.625 0.969,0.229 10 false ECC (*A) (*C) 1.042,4.01 1.51,4.271 0.469,0.26 10 false *i (*D)
*A w/ Lane Departure Alert System *B w/ Voice Switch
*C w/ Speed Limiter System *D w/ Microphone
*a Component without harness connected
(Steering Pad Switch Assembly)
*b Seek+
*c Seek- *d Volume+
*e Volume- *f MODE
*g Voice *h Off Hook
*i On Hook *j Up
*k Down *l Left
*m Right *n Enter
*o Back *p Distance Control
*q TRIP *r Lane Departure Alert
*s Speed Limiter - -


Standard Resistance:
Tester Connection Condition Specified Condition
z1-11 (AU1) - z1-8 (EAU) No switch pushed 95 to 105 kΩ
Seek+ switch pushed Below 2.5 Ω
Seek- switch pushed 313 to 345 Ω
Volume+ switch pushed 950 to 1050 Ω
Volume- switch pushed 2955 to 3265 Ω
z1-10 (AU2) - z1-8 (EAU) No switch pushed 95 to 105 kΩ
MODE switch pushed Below 2.5 Ω
On hook switch pushed*1 313 to 345 Ω
Off hook switch pushed*1 950 to 1050 Ω
Voice switch pushed*2 2955 to 3265 Ω
z1-3 (+DP2) - z1-8 (EAU) No switch pushed 95 to 105 kΩ
Left switch pushed Below 2.5 Ω
Up switch pushed 313 to 345 Ω
Down switch pushed 950 to 1050 Ω
Right switch pushed 2955 to 3265 Ω
z1-2 (+DP) - z1-8 (EAU) No switch pushed 95 to 105 kΩ
Enter switch pushed Below 2.5 Ω
TRIP switch pushed 313 to 345 Ω
Back switch pushed 950 to 1050 Ω
z1-4 (DIST) - z1-7 (ECC)*3 No switch pushed 1 MΩ or higher
Distance control switch pushed Below 2.5 Ω
Lane departure alert switch pushed 228 to 252 Ω
z1-9 (ASL) - z1-7 (ECC)*4 No switch pushed 1 MΩ or higher
Speed limiter switch pushed Below 2.5 Ω
z1-1 (HO) - A-1(HO) Always Below 2.5 Ω


*1: w/ Microphone

*2: w/ Voice Switch

*3: w/ Lane Departure Alert System

*4: w/ Speed Limiter System


If the result is not as specified, replace the steering pad switch assembly.


b.
C366730C01
1.906,1.198 1.583,0.542 true 2.167,1.188 2.49,0.521 true 0.156,0.146 0.469,0.344 0.313,0.198 10 false *a 1.25,0.448 1.604,0.635 0.354,0.188 10 false IL+2 2.563,0.448 2.917,0.635 0.354,0.188 10 false IL-2
*a Component without harness connected
(Steering Pad Switch Assembly)


Check that the illumination illuminates.

i.

Apply auxiliary battery voltage between the terminals of the switch, and check the illumination condition of the steering pad switch assembly.

Standard:
Measurement Condition Specified Condition
auxiliary battery positive (+) → 5 (IL+2)
auxiliary battery negative (-) → 6 (IL-2)
Illuminates


If the result is not as specified, replace the steering pad switch assembly.