Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM
RM32K0E _58 Vehicle Interior _061818 DOOR LOCK _0301274 POWER DOOR LOCK CONTROL SYSTEM W

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the power switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Door Lock.


v.

Select the setting by referring to the table below.

Door Lock
Tester Display Description Default Setting ECU
Unlock Key Twice Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 2