Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM › 2016.10–2019.09
RM32K0E _58 Vehicle Interior _061818 DOOR LOCK _0301275 WIRELESS DOOR LOCK CONTROL SYSTEM D

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM  SYSTEM DESCRIPTION  


WIRELESS DOOR LOCK CONTROL SYSTEM


The wireless door lock control system can be used to lock and unlock all doors from a distance. The system is controlled by an electrical key transmitter sub-assembly which sends radio waves to the electrical key and TPMS receiver assembly. The certification ECU (smart key ECU assembly) performs an ID code identification process and operates the door lock control.


MULTI CHANNEL FUNCTION


The wireless door lock control system has a multi channel function. Each time the switch on the electrical key transmitter sub-assembly is pressed, the channel is switched alternately between 2 different frequencies and the signal is sent to the electrical key and TPMS receiver assembly.


FUNCTION OF MAIN COMPONENTS


Component Function
Electrical key transmitter sub-assembly
·

Has the lock, unlock switches.

·

Transmits weak radio waves (recognition codes and function codes) to the electrical key and TPMS receiver assembly.

·

Illuminates the indicator light (LED) during transmission.


Electrical key and TPMS receiver assembly Receives weak radio waves from the electrical key transmitter sub-assembly and sends them to the certification ECU (smart key ECU assembly).
·

Front door courtesy light switch assembly (for LH/RH)

·

Rear door courtesy light switch assembly (for LH/RH)

·

Back door courtesy switch


·

Turns on when a door is opened and turns off when it is closed.

·

Outputs door status signals (open or closed) to the main body ECU (multiplex network body ECU).


·

Front door lock with motor assembly LH/RH

·

Rear door lock assembly LH/RH


Has a built-in motor that locks or unlocks the door.
·

Front door lock with motor assembly RH*4 or *5

·

Front door lock with motor assembly LH*1

·

Rear door lock with motor assembly RH*2 or *3


Transmits the door lock position of each door to the main body ECU (multiplex network body ECU).
Certification ECU (Smart key ECU assembly) Sends wireless door lock control signals in response to the code data from the electrical key and TPMS receiver assembly and signals from each ECU.

*1: for RHD

*2: w/ Double Locking System

*3: w/ Entry Function

*4: for LHD with Double Loking System

*5: for LHD with Entry Function



SYSTEM FUNCTION


The electrical key transmitter sub-assembly has lock, unlock switches. Operating these switches activates each function.

The wireless door lock control system has the following functions:

HINT:

The default setting of the following functions is on. Part of these functions can be customized.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS


Function Operation
All door lock Pressing the lock switch locks all of the doors.
All door unlock Pressing the unlock switch unlocks all of the doors.
All door unlock
(Unlock 2 operation)
Pressing the unlock switch twice within 5 seconds unlocks all of the doors after the driver door is unlocked.
Automatic lock If none of the doors is opened within 30 seconds after they are unlocked by the wireless door lock control, all of the doors will lock again automatically.
Answer-back (Hazard warning light)
·

When the doors are locked by wireless operation, the hazard warning lights flash once.

·

When the doors are unlocked by wireless operation, the hazard warning lights flash twice.


Door ajar warning The buzzer sounds for 5 seconds continuously when the lock switch is pressed when any of the doors are ajar. The buzzer stops when all of the doors are closed or the unlock switch is pressed.
Illuminated entry When all of the doors are locked, pressing the unlock switch causes the interior lights to come on simultaneously with the unlock operation.
Self-diagnostic mode If the electrical key and TPMS receiver assembly receives normal radio waves from the electrical key transmitter sub-assembly when the system is in diagnostic mode, it sounds the wireless door lock buzzer in a normal pattern that corresponds to the function of each switch.