Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY
RM32K0E _58 Vehicle Interior _061825 SEAT _0301289 REAR SEAT ASSEMBLY A

SEAT  REAR SEAT ASSEMBLY  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 73178A 1.REMOVE SEAT BELT ANCHOR COVER CAP (for RH Side)

a.
B453984C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Using a moulding remover A, disengage the claws and guides to separate the rear seat shoulder belt cover with seat belt anchor cover cap as shown in the illustration.


b.
B460352C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the guides to remove the seat belt anchor cover cap as shown in the illustration.


Hide 73373F 2.REMOVE REAR SEAT SHOULDER BELT HOLE COVER (for RH Side)

a.
B441951

Remove the rear seat shoulder belt hole cover.


Hide 72679 3.REMOVE REAR SEATBACK LOCK CONTROL BEZEL (for RH Side)

a.
B453985

Disengage the claws to remove the rear seatback lock control bezel.


b.
B453989

Disengage the hooks from the separate type rear seatback cover.


Hide 71701C 4.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH (for RH Side)

a.
B453986

Disengage the hook.


b.
B453987C01
0.594,0.979 0.969,1.115 true 2.271,1.313 2.573,1.146 true 1.073,1.104 1.281,1.313 0.208,0.208 10 true *a 2.094,1.313 2.302,1.521 0.208,0.208 10 true *a
*a Fastener


Open the 2 fasteners as shown in the illustration.


c.
B453988

Disengage the claws and guides to remove the rear seatback board sub-assembly RH.


Hide 71931A 5.REMOVE REAR SEAT HEADREST SUPPORT (for RH Side)

a.
B453992C02
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the 2 rear seat headrest supports as shown in the illustration.


Hide 71931A 6.REMOVE REAR SEAT CENTER HEADREST SUPPORT (w/ Center Headrest)

a.
B453990C02
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the 2 rear seat center headrest supports as shown in the illustration.


Hide 7.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

a.
B453993

Pass the rear center seat outer belt assembly through the separate type rear seatback cover with pad and remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH.


Hide 71077S 8.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side)

a.

Using a screwdriver, disengage the claws to remove the separate type rear seatback cover from the separate type rear seatback pad RH as shown in the illustration.

B453994C01
1.531,2.51 1.906,2.323 true 1.927,2.177 2.24,2.375 0.313,0.198 10 false *a
*a Screwdriver - -



Hide 73350C 9.REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (for RH Side)

Hide 72630C 10.REMOVE REAR SEATBACK LOCK ASSEMBLY RH (for RH Side)

a.
B453995

Remove the 2 bolts.


b.

Disengage the guides to rear seatback lock assembly RH.


Hide 72679 11.REMOVE REAR SEATBACK LOCK CONTROL BEZEL (for LH Side)

a.
B453996

Disengage the claws to remove the rear seatback lock control bezel.


b.
B454000

Disengage the hooks from the separate type rear seatback cover.


Hide 71702C 12.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH (for LH Side)

a.
B453997

Disengage the hook.


b.
B453998C02
1.229,1.302 1.448,1.156 true 2.198,1.156 2.448,1.302 true 2.063,1.052 2.26,1.292 0.198,0.24 10 true *a 1.51,1.042 1.708,1.25 0.198,0.208 10 true *a
*a Fastener


Open the 2 fasteners as shown in the illustration.


c.
B453999

Disengage the claws and guides to remove the rear seatback board sub-assembly LH.


Hide 71931A 13.REMOVE REAR SEAT HEADREST SUPPORT (for LH Side)

a.
B454001C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the 2 rear seat headrest supports as shown in the illustration.


Hide 14.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

a.
B454003

Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.


Hide 71078S 15.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side)

a.

Using a screwdriver, disengage the claws to remove the separate type rear seatback cover from the separate type rear seatback pad LH as shown in the illustration.

B454004C01
1.667,2.729 1.969,2.552 true 2,2.427 2.313,2.625 0.313,0.198 10 false *a
*a Screwdriver - -



Hide 72640A 16.REMOVE REAR SEATBACK LOCK ASSEMBLY LH (for LH Side)

a.
B454005

Remove the 2 bolts.


b.

Disengage the guides to rear seatback lock assembly LH.


Hide 73731B 17.REMOVE NO. 1 CHILD RESTRAINT SEAT COVER (w/ Cover)

a.
B454006C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws and guides to remove the No. 1 child restraint seat cover as shown in the illustration.

HINT:

Use the same procedure for all No. 1 child restraint seat covers.



Hide 73731C 18.REMOVE NO. 2 CHILD RESTRAINT SEAT COVER (w/ Cover)

a.
B454007C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the No. 2 child restraint seat cover as shown in the illustration.

HINT:

Use the same procedure for all No. 2 child restraint seat covers.



Hide 73735 19.REMOVE CHILD RESTRAINT SEAT GUIDE CUP (w/ Cover)

a.
B454008

Remove the child restraint seat guide cup.

HINT:

Use the same procedure for all child restraint seat guide cups.



Hide 71075B 20.REMOVE BENCH TYPE REAR SEAT CUSHION COVER

a.

Disengage the hook and loop fastener and hooks.

B454010C01
3.573,2.135 4,1.688 true 4.021,1.573 4.219,1.75 0.198,0.177 10 true *a
*a Hook and Loop Fastener - -



b.

Remove the rear seat cushion pad from the No. 1 rear seat cushion pad sub-assembly.

B460350


c.

Using a screwdriver, disengage the claws to remove the bench type rear seat cushion cover from the No. 1 rear seat cushion pad sub-assembly as shown in the illustration.

B454011C01
1.583,2.656 1.917,2.51 false 1.969,2.396 2.281,2.594 0.313,0.198 10 false *a
*a Screwdriver - -