Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY
RM32K0E _58 Vehicle Interior _061825 SEAT _0301289 REAR SEAT ASSEMBLY A

SEAT  REAR SEAT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 72693 1.INSTALL REAR SEAT CUSHION LOCK HOOK

a.
B458577C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install a new rear seat cushion lock hook as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



Hide 2.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

a.

Place the bench type rear seat cushion assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B458492C01
0.323,1.573 0.51,1.292 true 2.646,1.823 2.458,1.615 true 2.042,0.469 2.271,0.26 true 2.667,1.76 2.865,1.948 0.198,0.188 10 true *a 2.26,0.167 2.469,0.354 0.208,0.188 10 true *b 0.146,1.531 0.344,1.719 0.198,0.188 10 true *a
*a Rear Seat Cushion Frame Hook Front Side
*b Rear Seat Cushion Frame Hook Rear Side
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the rear seat cushion frame hook on the rear side of the bench type rear seat cushion assembly as shown in the illustration.


c.

Engage the rear seat cushion frame hooks on the front side of the bench type rear seat cushion assembly as shown in the illustration.

NOTICE:

Confirm that the bench type rear seat cushion assembly is securely installed.



Hide 3.INSTALL REAR SEATBACK ASSEMBLY LH

a.

Place the rear seatback assembly LH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B453981E01
1.792,0.104 1.948,0.26 0.156,0.156 10 true 1 2.198,1.51 2.354,1.667 0.156,0.156 10 true 2

Engage the guides to install the rear seatback assembly LH.


c.

Install the 2 bolts.

Torque:
36.8 N*m (375 kgf*cm, 27 ft.*lbf)

NOTICE:

Tighten bolts in the order shown in the illustration.



d.
B473900C04
2.896,1.073 1.635,0.792 1.635,0.792 2.49,0.479 true 2.354,1.438 2.802,1.177 true 1.354,0.677 1.583,0.875 0.229,0.198 10 true *a 2.094,1.375 2.323,1.573 0.229,0.198 10 true *a
*a Hook and Loop Fastener


Engage the hook and loop fasteners.


e.

Pull back the rear seatback assembly LH.


Hide 4.INSTALL REAR SEATBACK ASSEMBLY RH

a.

Place the rear seatback assembly RH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B453979E01
0.76,0.063 0.917,0.26 0.156,0.198 10 true 1 0.802,1.875 0.958,2.073 0.156,0.198 10 true 2

Engage the guides to install the rear seatback assembly RH.


c.

Install the 2 bolts.

Torque:
36.8 N*m (375 kgf*cm, 27 ft.*lbf)

NOTICE:

Tighten bolts in the order shown in the illustration.



d.
B473899C04
0.781,1.615 0.396,1.031 0.396,1.031 0.813,0.677 true 0.99,1.854 1.26,1.979 true 0.125,0.927 0.354,1.125 0.229,0.198 10 true *a 1.344,1.917 1.573,2.115 0.229,0.198 10 true *a
*a Hook and Loop Fastener


Engage the hook and loop fasteners.


e.

Pull back the rear seatback assembly RH.


Hide 73350C 5.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

a.
B458491

Connect the rear center seat outer belt assembly as shown in the illustration.


Hide 71960B 6.INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (w/ Center Headrest)

a.

Install the rear seat center headrest assembly.


Hide 71940A 7.INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)

a.

Install the rear seat headrest assembly.


Hide 71940A 8.INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)

a.

Install the rear seat headrest assembly.