Home › Vehicle Interior › SEAT › FRONT SEAT CUSHION HEATER › 2016.10–2018.05
RM32K0E _58 Vehicle Interior _061825 SEAT _0301293 FRONT SEAT CUSHION HEATER G

SEAT  FRONT SEAT CUSHION HEATER  INSPECTION  


PROCEDURE

Hide 87510L 1.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH

a.

Check the resistance.

i.
B460292C01
1.583,1.833 1.917,2.083 0.333,0.25 1.552,0.26 1.885,0.51 0.333,0.25 0.188,0.219 0.5,0.417 0.313,0.198 10 false *a 1.667,0.302 1.979,0.5 0.313,0.198 10 false A 1.698,1.885 2.01,2.083 0.313,0.198 10 false B
*a Component without harness connected
(Front Seat Cushion Heater Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-4 - A-5 Seat heater temperature 20°C (68°F) 2.36 to 2.42 kΩ
B-1 - B-2 4.46 to 5.34 Ω
A-2 - A-6 - B-2 Always Below 1 Ω


If the result is not as specified, replace the front seat cushion heater assembly LH.



Hide 87510K 2.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH

a.

Check the resistance.

i.
B460292C02
1.552,0.313 1.885,0.563 0.333,0.25 1.583,1.917 1.917,2.167 0.333,0.25 0.167,0.167 0.479,0.365 0.313,0.198 10 false *a 1.667,0.344 1.979,0.542 0.313,0.198 10 false A 1.698,1.948 2.01,2.146 0.313,0.198 10 false B
*a Component without harness connected
(Front Seat Cushion Heater Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-4 - A-5 Seat heater temperature 20°C (68°F) 2.36 to 2.42 kΩ
B-1 - B-2 4.46 to 5.34 Ω
A-2 - A-6 - B-2 Always Below 1 Ω


If the result is not as specified, replace the front seat cushion heater assembly RH.